ES2A-A

ES2A-A THRU ES2G-A SURFACE MOUNT FAST ULTRAFAST RECTIFIER VOLTAGE：50 TO 400V CURRENT：2.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency SMA／DO-214AA MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD-750, Method 2026 Case：JEDEC DO-214AC molded plastic body over passivated chip Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at TL =100℃ Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ Maximum Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance (Note1 ) (Note 2) (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(ja) Rth(jl) Tstg, Tj 15 18.0 75.0 20.0 -55 to +150 0.92 10.0 350.0 25 ES2A-A 50 35 50 ES2B-A 100 70 100 ES2C-A 150 105 150 2.0 50.0 1.25 ES2D-A 200 140 200 ES2G-A 400 280 400 units V V V A A V µA nS pF ℃/W ℃ Storage and Operating Junction Temperature Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Units mounted on P.C.B. 5.0×5.0mm(0.013mm thick) land areas Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES ES2A-A THRU ES2G-A Rev.A1 www.gulfsemi.com