ES3A

ES3A THRU ES3J SURFACE MOUNT FAST ULTRAFAST RECTIFIER VOLTAGE：50 TO 600V CURRENT：3.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency SMC／DO-214AB MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD-750, Method 2026 Case：JEDEC DO-214AB molded plastic body over passivated chip Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL ES3A 50 35 50 ES3B 100 70 100 ES3C 150 105 150 3.0 100.0 0.90 10.0 500.0 20 45.0 12.0 -55 to +150 25 35 1.25 1.7 ES3D 200 140 200 ES3G 400 280 400 ES3J 600 420 600 units V V V A A V µA nS pF ℃/W Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at TL =100℃ Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current 3.0A Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ Maximum Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance (Note1 ) (Note 2) (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(jl) Tstg, Tj Storage and Operating Junction Temperature Note： ℃ 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES ES3A THRU ES3J Rev.A2 www.gulfsemi.com