FERP10F

FERP10F Ultrafast Plastic Power Rectifiers VOLTAGE: 300V CURRENT: 10.0A FEATURE Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High voltage and high reliability High speed switching ITO-220AB MECHANICAL DATA Case: JEDEC ITO-220AB molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward Current 5A and 25°C Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical thermal resistance junction to case Storage and Operating Temperature Range Note: Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A FERP10F 300 210 300 10 150 1.3 50 5.0 500.0 5.0 -55 to +150 units V V V A A V nS µA ° C/W Maximum Maximum Maximum Maximum Vrrm Vrms Vdc If(av) Ifsm Vf Trr Ir Rth(jc) Tstg, Tj °C Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FERP10F Rev.A1 www.gulfsemi.com