FK1K

FK1K SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE：700V CURRENT： 1.0A FEATURE Ideal for surface mount pick and place applications Low profile package Built-in strain relief High surge capability Glass passivated chip Fast recovery time for high efficiency SMA／DO-214AC MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD750, Method 2026 High temperature soldering guaranteed: 250° C/10 seconds at terminals Case： JEDEC DO-214AC(SMA) molded plastic body Polarity： color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL FK1K 700 490 700 1.0 30.0 1.3 5.0 300.0 400 10.0 32.0 -50 to +150 units V V V A A V μA μA nS pF ℃ /W Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at Ta=90℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj R(ja) Tstg, Tj ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FK1K 1 1 Rev.A1 www.gulfsemi.com