G3B

G3B THRU G3K SINTERED GLASS JUNCTION RECTIFIER VOLTAGE: 100V to 800V CURRENT: 3.0A FEATURE High temperature metallurgically bonded construction Sintered glass cavity free junction High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension G-3 MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: G-3 sintered glass case Polarity: color band denotes cathode Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =70°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at 3.0A Maximum Full Load Reverse Current Full Cycle Average at 70°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C Typical Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient and from Junction to Lead at 3/8”lead length, with both leads mounted between heatsinks G3B 100 70 100 G3J 600 420 600 3.0 125.0 G3K 800 560 800 units V V V A A Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Trr Cj Rth(ja) Rth(jl) Tstg, Tj 1.2 200.0 5.0 100.0 3.0 40.0 20.0 10.0 -65 to +175 1.1 V µA µA µS pF °C /W °C (Note 3) Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G3B THRU G3K Rev.A1 www.gulfsemi.com