GBL005

GBL005 THRU GBL10 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current:4.0A Features Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board GBL Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward Tc = 50℃(Note1) rectified output current Ta = 40℃(Note2) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 4.0A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Typical junction capacitance per leg at 4.0V,1MHz Operating junction and storage temperature range Ta = 25° C Ta = 125° C Vrrm Vrms Vdc If(av) Ifsm Vf I2t Ir Rth(ja) Rth(jc) Cj Tj, Tstg 95 -55 to +150 GBL0 05 50 35 50 GBL0 1 100 70 100 GBL0 2 200 140 200 GBL0 4 400 280 400 4.0 3.0 150 1.0 93 5.0 500 22 3.5 40 GBL0 6 600 420 600 GBL0 8 800 560 800 GBL1 0 1000 700 1000 units V V V A A V A2Sec µA ℃/W pF ℃ Note: 1. Unit mounted on P.C.B. with 3.0 x 3.0 x 0.11" thick (7.5 x 7.5 x 0.3 cm) Aluminum plate 2. Unit mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5"(12 x 12mm) copper pads Rev.A9 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GBL005 THRU GBL10 Rev.A9 www.gulfsemi.com