GBU10B

GBU10A THRU GBU10M SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 10.0A Features Ideal for printed circuit board Glass passivated chip junction High case dielectric strength High surge overload rating This series is UL listed under Recognized Component Index, file number E230084 GBU Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified output current at Tc = 100℃ (Note 1) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 5A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Typical junction capacitance per leg at 4V,1MHz Maximum thermal resistance per leg Operating junction and storage temperature range (Note1) (Note2) Ta = 25° C Ta = 125° C Vrrm Vrms Vdc If(av) Ifsm Vf I2t Ir Cj Rth(ja) Rth(jc) Tj, Tstg 211 21 2.0 -55 to +150 GBU 10A 50 35 50 GBU 10B 100 70 100 GBU 10D 200 140 200 GBU 10G 400 280 400 10.0 220 1.0 200 5.0 500 94 GBU 10J 600 420 600 GBU 10K 800 560 800 GBU 10M 1000 700 1000 units V V V A A V A2Sec µA pF ℃/W ℃ Note: 1. Unit mounted in free air no heat sink on P.C.B. 0.5 x 0.5” (12 x12 mm) copper pads, 0.375”(9.5mm) lead length 2. Device mounted on 4 x 6 x 0.25" Al-plate heatsink Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GBU10A THRU GBU10M Rev.A1 www.gulfsemi.com