GER20M

GER20M SURFACE MOUNT AVALANCHE GLASS PASSIVATED RECTIFIER VOLTAGE：1000V CURRENT：2.0A FEATURE Ideal for surface mount pick and place application Controlled avalanche characteristics Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Marking：ER2M Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage atrated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Pulse energy in avalanche mode, non repetitive (inductive load switch off) at I(BR)R=1A Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Er Cj Rth(jl) Tj, Tstg GER20M 1000 700 1000 2.0 50.0 1.1 2.0 100.0 20 30.0 16.0 -50 to +150 units V V V A A V uA mJ pF ℃/W ℃ Storage and Operating Temperature Range Note： 1. Measured at 1.0 MHZ and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to terminal mounted on 7×7mm copper pad area Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GER20M Rev.A1 www.gulfsemi.com