GPP1B

GPP1A THRU GPP1M GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250° /10sec/0.375" lead length at 5 lbs tension C Glass Passivated chip DO – 41\DO – 204AL MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25° unless otherwise stated, C, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8" lead length at Ta =75°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75° C Maximum DC Reverse Current Ta =25° C at rated DC blocking voltage Ta =100° C Typical Junction Capacitance (Note 1) Operating Temperature (Note 2) Storage and Operation Junction Temperature Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Cj R(ja) Tstg, Tj GPP 1A 50 35 50 GPP 1B 100 70 100 GPP 1D 200 140 200 GPP 1G 400 280 400 1.0 30.0 1.1 30.0 5.0 50.0 15.0 50.0 -55 to +150 GPP 1J 600 420 600 GPP 1K 800 560 800 GPP 1M 1000 700 1000 units V V V A A V µA µA µA pF ° /W C °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted Rev.A4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GPP1A THRU GPP1M 1 1 Rev.A4 www.gulfsemi.com