GR2K

GR2A THRU GR2M SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 2.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Fast recovery time for high efficiency SMB／DO—214AA MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL GR 2A 50 35 50 GR 2B 100 70 100 GR 2D 200 140 200 GR 2G 400 280 400 2.0 50.0 1.3 5.0 200.0 150 50.0 20.0 -55 to +150 250 500 GR 2J 600 420 600 GR 2K 800 560 800 GR 2M 1000 700 1000 units V V V A A V μA μA nS pF ℃ /W Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at TL =100℃ Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj R(jl) Tstg, Tj ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GR2A THRU GR2M 1 1 Rev.A5 www.gulfsemi.com