GS1G

GS1A THRU GS1M SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 1.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =100℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage and Operating Junction Temperature Vrrm Vrms Vdc If(av) Ifsm Vf Ir Cj R(jl) Tstg GS 1A 50 35 50 GS 1B 100 70 100 GS 1D 200 140 200 GS 1G 400 280 400 1.0 30.0 1.1 5.0 200.0 15.0 30.0 -50 to +150 GS 1J 600 420 600 GS 1K 800 560 800 GS 1M 1000 700 1000 units V V V A A V μA μA pF ℃/W ℃ Note： 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area1 1 Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GS1A THRU GS1M 2 2 Rev.A6 www.gulfsemi.com