GS3G

GS3A THRU GS3M SURFACE MOUNT GLASS PASSIVATED RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 3.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals SMC／DO-214AB MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =75℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(ja) Rth(jl) Rth(jc) Tstg GS 3A 50 35 50 GS 3B 100 70 100 GS 3D 200 140 200 GS 3G 400 280 400 3.0 100.0 1.1 5.0 250 2.3 60.0 47.0 13.0 28.0 -50 to +150 GS 3J 600 420 600 GS 3K 800 560 800 GS 3M 1000 700 1000 units V V V A A V uA us pF ℃/W ℃ Storage and Operating Temperature Range Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied voltage of 4.0Vdc 3. Thermal Resistance from junction to ambient and from junction to lead mounted on 8×8mm copper pad area Rev.A7 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GS3A THRU GS3M Rev.A7 www.gulfsemi.com