GSIB810

GSIB805 THRU GSIB8100 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V 8.0A Current: Features Glass passivated chip junction Ideal for printed circuit board High surge current capability High case dielectric strength This series is UL listed under Recognized Component Index, file number E185029 GSIB-5S Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward Rectified output current at Tc =100℃(Note 1) Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 4.0A Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Ta = 25° C Ta = 125° C (Note2) (Note1) Vrrm Vrms Vdc If(av) Ifsm Vf I2t Ir Rth(ja) Rth(jc) Tj, Tstg GSIB8 05 50 35 50 GSIB8 10 100 70 100 GSIB8 20 200 140 200 GSIB8 40 400 280 400 8.0 200 0.95 120 10.0 200 22.0 3.4 -55 to +150 GSIB8 60 600 420 600 GSIB8 80 800 560 800 GSIB8 100 1000 700 1000 units V V V A A V A2Sec µA ℃/W ℃ Operating junction and storage temperature range Note: 1. Unit case mounted onAl plate heatsink 2. Unit case mounted on P.C.B. with 0.5 x 0.5” (12 x 12mm) copper peads and 0.375”(9.5mm) lead length 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Rev.A8 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GSIB805 THRU GSIB8100 Rev.A8 www.gulfsemi.com