GU1A

GU1A THRU GU1M SURFACE MOUNT SWITCHING RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 1.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Fast recovery time for high efficiency SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL GU 1A 50 35 50 GU 1B 100 70 100 GU 1D 200 140 200 GU 1G 400 280 400 1.0 30.0 1.0 1.4 10.0 500.0 50 15.0 30.0 -50 to +150 75 1.7 GU 1J 600 420 600 GU 1K 800 560 800 GU 1M 1000 700 1000 units V V V A A V μA μA nS pF ℃/W Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =110℃ Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Forward Voltage at rated forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj R(jl) Tstg, Tj ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area1 1Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES GU1A THRU GU1M 2 2 Rev.A5 www.gulfsemi.com