LB01

LB005 THRU LB10 SINGLE PHASE GLASS PASSIVATED SURFACE MOUNT FLAT BRIDGE RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 0.6A FEATURE Ideal for printed circuit board Glass passivated chip Reliable low cost construction utilizing molded plastic technique High surge current capability Small size, simple installation High temperature soldering guaranteed: 260℃/10 seconds/0.375” lead length at 5 lbs tension LBF MECHANICAL DATA Terminal: Plated leads solderable per MIL-STD 202E, method 208C Case:UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current at Ta =40°C Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Instantaneous Forward Voltage at forward current 0.3A Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Thermal resistance junction to lead on aluminum substrate on glass-epoxy P.C.B. Storage and Operating Junction Temperature Range Note: Vrrm Vrms VDC If(av) Ifsm Vf Ir Rth(jl) Rth(ja) Tstg, Tj LB 005 50 35 50 LB 01 100 70 100 LB 02 200 140 200 LB 04 400 280 400 0.6 20.0 0.95 5.0 100.0 25 62.5 80 -55 to +150 LB 06 600 420 600 LB 08 800 560 800 LB 10 1000 700 1000 Units V V V A A V µA ℃/W ℃ Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES LB005 THRU LB10 Rev.A1 www.gulfsemi.com