MUR130S

MUR105S THRU MUR1100S ULTRAFAST EFFICIENT PLASTIC SILICON RECTIFIER Voltage: 50 to 1000V Current: 1.0A FEATURE Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension DO – 41\DO – 204AL MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25° unless otherwise stated, C, for capacitive load, derate current by 20%) Symbol Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8" lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at Rated forward current Maximum DC Reverse Current Ta =25° C At rated DC blocking voltage Ta =125° C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance Typical Thermal Resistance Storage and Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8″lead length, P.C. Board Mounted MUR 105S 50 35 50 MUR 110S 100 70 100 MUR 120S 200 140 200 MUR 130S 300 210 300 MUR 140S 400 280 400 1.0 MUR 160S 600 420 600 MUR 180S 800 560 800 MUR 1100S 1000 700 1000 units V V V A A Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(ja) Tstg, Tj 35.0 0.875 1.25 10.0 100.0 25 25 27 -55 to +150 50 50 75 1.75 V µA nS pF ℃ /W °C (Note 2) (Note 3) Junction Operating Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES MUR120S THRU MUR1100S Rev.A2 www.gulfsemi.com