MUR160

MUR105 THRU MUR160 ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE:50 TO 600V CURRENT: 1.0A FEATURE Ultrafast Nanosecond Recovery Times 150°C Operating Junction Temperature  Low Forward Voltage  Low Leakage Current  High Temperature Glass Passivated Junction DO-15 Mechanical Characteristics  Case: Epoxy, Molded Weight: 0.4 gram (approximately)  Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable solder heat resistance :265degreeC Max. for 10 Seconds, 1/16  from case  Polarity: Cathode Indicated by Polarity Band Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Temperature Range Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj R(ja) Tstg, Tj MUR 105 50 35 50 MUR 110 100 70 100 MUR 120 200 140 200 1.0 35 MUR 130 300 210 300 MUR 140 400 280 400 MUR 160 600 420 600 units V V V A A 0.875 10 50 25 25 27 -55 to +150 1.25 V µA µA 50 50 nS pF °C /W °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC MURVES MUR105 THRU MUR160 1 1 Rev.A6 www.gulfsemi.com