MUR280S

MUR280S GLASS PASSIVATED JUNCTION Ultra fast Plastic Rectifiers VOLTAGE: 800V CURRENT:2.0A DO-41/DO-204AL FEATURE Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High temperature soldering guaranteed: 250° C/10 seconds, 0.375" (9.5mm) lead length,5 lbs. (2.3kg ) tension MECHANICAL DATA Case: JEDEC DO-41 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-202E, Method 208C Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at=60°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to ambient (Note 2) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Storage and Operating Temperature Range Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted MUR280S 800 560 800 2.0 35 1.75 75 50 10 100 -55 to +150 units V V A A V nS ° C/W µA µA Vrrm Vrms Vdc If(av) Ifsm Vf Trr Rth(ia) Ir Tstg, Tj °C Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC MURVES MUR280S Rev.A1 www.gulfsemi.com