MURS260-A

MURS260-A SURFACE MOUNT ULTRAFAST GLASS PASSIVATED RECTIFIER VOLTAGE：600V CURRENT： 2.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency SMA／DO-214AC MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD-750, Method 2026 Case：JEDEC DO-214AC molded plastic body over passivated chip Polarity：Color band denotes cathode Marking：M260A Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage atrated Forward current Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Typical Thermal Resistance Storage and Operating Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHZ and applied voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Ta =25℃ Ta =150℃ (Note 2) (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Trr Ir Cj Rth(jl) Tj, Tstg MURS260-A 600 420 600 2.0 35.0 1.45 50 5.0 150.0 30.0 13.0 -50 to +150 units V V V A A V nS µA pF ℃/W ℃ Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES MURS260-A Rev.A1 www.gulfsemi.com