NF3J

NF3J SURFACE MOUNT ULTRAFAST RECTIFIER VOLTAGE：600V CURRENT：3.0A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency SMC／DO—214AB MECHANICAL DATA Terminal: Solder plated, solderable per MIL-STD-750, Method 2026 Case: JEDEC DO-214AB molded plastic over glass passivated chip Polarity: Color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =79℃ Non-repetitive Peak Forward Surge Current 50Hz half sine- wave Maximum Instantaneous Forward Voltage at forward current 3.0A Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Note： 1. Reverse Recovery Condition Ta =25℃, Ifm =3.0A, -di/dt =50A/us 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area NF3J 600 420 600 3.0 45.0 1.7 20.0 200.0 35 33 13 -40 to +150 units V V V A A V µA nS pF ℃/W ℃ Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(jl) Tstg, Tj Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES NF3J Rev.A2 www.gulfsemi.com