RL102

RL101 THRU RL107 GENERAL PURPOSE PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.0A FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension A - 405 MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL RL 101 50 35 50 RL 102 100 70 100 RL 103 200 140 200 RL 104 400 280 400 1.0 30.0 1.1 30.0 5.0 50.0 15.0 50.0 -50 to +175 RL 105 600 420 600 RL 106 800 560 800 RL 107 1000 700 1000 units V V V A A V µA µA µA pF °C/W °C Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Storage and Operation Junction Temperature Note: Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Cj R(ja) Tstg 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RL101 THRU RL107 1 Rev.A5 www.gulfsemi.com