RU2AG

RU2AG THRU RU2MG FULTRAFAST EFFICIENT GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.5A FEATURE Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250° /10sec/0.375" lead length at 5 lbs tension C Glass Passivated chip DO-15\DO-204AC MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E,method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL RU2A G 50 35 50 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum full load reverse current full cycle average at 55°C Ambient Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Typical Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Trr Cj R(ja) Tstg, Tj RU2B G 100 70 100 RU2D G 200 140 200 RU2G G 400 280 400 1.5 50 RU2J G 600 420 600 RU2K G 800 560 800 RU2M G 1000 700 1000 units V V V A A 1.1 1.4 100 10 100 50 40 20 -50 to +150 1.7 V µA µA µA 75 50 nS pF °C /W Storage and Operating Temperature Range °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.4, 1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RU2AG THRU RU2MG