SB29

SB22 THRU SB210 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 20 to 100V CURRENT: 2.0A FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guard ring for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals SMB/DO--214AA MECHANICAL DATA Case: JEDEC SMB/DO-214AA molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at rated Forward current (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Operating junction Temperature range Storage Temperature range Ta =25ºC Ta =100ºC (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Rth(ja) Rth(jc) Tj Tstg -55 to +125 -55 to +150 0.50 0.5 20.0 88.0 50.0 -55 to +150 10.0 mA ºC/W ºC ºC SB2 2 20 14 20 SB2 3 30 21 30 SB2 4 40 28 40 SB2 5 50 35 50 2.0 50.0 0.70 0.79 SB2 6 60 42 60 SB2 9 90 63 90 SB2 10 100 70 100 units V V V A A V Note: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) P.C.B. mounted with 0.2 x 0.2inches(5.0 x 5.0mm) copper pad areas Rev.A2 www.gulfsemi.com.cn RATINGS AND CHARACTERISTIC CURVES SB22 THRU SB210 Rev.A2 www.gulfsemi.com.cn