SB510

SB510 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 100V CURRENT: 5.0A FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guard ring for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals SMC/DO--214AB MECHANICAL DATA Case: JEDEC DO-214AB molded plastic body Terminals: Solder plated, solder able per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage atrated Forward current (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Ta =25℃ Ta =100℃ (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Rth(ja) Tstg,Tj SB510 100 70 100 5.0 100.0 0.85 0.6 20.0 50.0 -55 to +150 units V V V A A V mA ℃/W ℃ Storage and Operating Temperature Range Note: 1. Pulse test: 300µs pulse width, 1% duty cycle 2. P.C.B. mounted with 0.2 x 0.2inches (5.0 x 5.0mm) copper pad areas Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB510 Rev.A1 www.gulfsemi.com