SBYD17D

SBYD17D SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：200V CURRENT： 1.0A FEATURE For surface mounted application High temperature metallurgic ally bonded Sintered glass junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 450℃/10sec/at terminal／complete device Submersible temperature of 265℃ for 10sec GF1/ DO-214BA MECHANICAL DATA Terminal：Plated Terminal, solderable per MIL-STD 202, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass Polarity：color band denotes cathode end Mark：D17D Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Reverse avalanche breakdown voltage at IR = 0.1 mA Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Ta =25℃ Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =150℃ Non-Repetitive Peak Reverse Avalanche Energy (Note 1) Typical Junction Capacitance Typical Thermal Resistance Note： 1. L=120mH; Tj=Tjmax prior to surge; inductive load switched off 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient 6.0mm2 copper pad to each terminal SBYD17D 200 140 200 225min 1.0 30.0 1.05 1.0 50.0 7.0 15.0 80.0 -65 to +175 units V V V V A A V µA mJ pF ℃/W ℃ Vrrm Vrms Vdc V(BR)R If(av) Ifsm Vf Ir Ersm Cj Rth(ja) Tst, Tj (Note 2) (Note 3) Operating and Storage Temperature Range Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SBYD17D Rev.A1 www.gulfsemi.com