SBYG20DG

SBYG20DG THRU SBYG20JG SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE：200 to 600V CURRENT：1.5A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief Low reverse current Soft recovery characteristics High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Fast reverse recovery time SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：Color band denotes cathode Marking：G20D G20G G20J Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, date current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum DC Reverse Current Tj =25℃ at rated DC blocking voltage Tj =100℃ Maximum Reverse Recovery Time (Note1 ) Pulse energy in avalanche mode, non repetitive(inductive load switch off) (Note 2) Typical Thermal Resistance (Note 3) (Note 4) Storage and Operating Junction Temperature Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. I(BR)R=1.0A, Tj=25℃ 3. TL=const. 3. Thermal Resistance from Junction to terminal mounted on epoxy-glass hard tissue SBYG20DG 200 140 200 SBYG20GG 400 280 400 1.5 50.0 1.4 1.0 10.0 75 20 25.0 150 -50 to +150 SBYG20JG 600 420 600 units V V V A A V µA nS mJ K/W ℃ Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Ersm Rth(jl) Rth(ja) Tstg, Tj Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SBYG20DG THRU SBYG20JG Rev.A1 www.gulfsemi.com