SBYG23MG

SBYG23MG SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE：1000V CURRENT：1.5A FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief Low reverse current Soft recovery characteristics High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Fast reverse recovery time SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：Color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, date current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Reverse Breakdown Voltage at IR = 100µA SBYG23MG 1000 700 1000 1000min 1.5 50.0 1.7 5.0 50.0 75 20 25.0 150 -50 to +150 units V V V V A A V µA nS mJ K/W ℃ Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine- wave superimposed on rated load Maximum Instantaneous Forward Voltage at Forward Current 1.0A Maximum DC Reverse Current Tj =25℃ at rated DC blocking voltage Tj =100℃ Maximum Reverse Recovery Time Pulse energy in avalanche mode, non repetitive(inductive load switch off) Typical Thermal Resistance (Note1 ) Vrrm Vrms Vdc V(BR)R If(av) Ifsm Vf Ir Trr Ersm Rth(jl) Rth(ja) Tstg, Tj (Note 2) (Note 3) (Note 4) Storage and Operating Junction Temperature Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. I(BR)R=1.0A, Tj=25℃ 3. TL=const. 4. Thermal Resistance from Junction to terminal mounted on epoxy-glass hard tissue, 17mm2 35μm Cu Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SBYG23MG Rev.A1 www.gulfsemi.com