SF1040CT

SF1040CT Ultra fast Plastic Power Rectifiers VOLTAGE: 400V CURRENT:10.0A FEATURE Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High voltage and high reliability High speed switching Low forward voltage TO-220AB MECHANICAL DATA Case: JEDEC TO-220 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward Current 5.0A and 25°C (Note 1) Maximum Reverse Recovery Time (Note 2) Typical thermal resistance junction to case Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Storage and Operating Temperature Range Note: 1. Pulse test: 300µs pulse width, 1% duty cycle 2. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A SF1040CT 400 280 400 10.0 60 1.3 35 4.5 10 200 -55 to +150 units V V V A A V nS ° C/W µA µA °C Maximum Maximum Maximum Maximum Vrrm Vrms Vdc If(av) Ifsm Vf Trr Rth(jc) Ir Tstg, Tj Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SF1040CT Rev.A1 www.gulfsemi.com