SMA23

SMA22 THRU SMA26 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE:20 TO 60V CURRENT: 2.0A FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guard ring for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals SMA/DO--214AC MECHANICAL DATA Case: JEDEC SMA/DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.002 ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at TL =100ºC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Ta =25ºC Ta =100ºC Vrrm Vrms Vdc If(av) Ifsm Vf Ir R(ja) Tstg 0.5 0.5 20.0 75.0 -65 to +150 10.0 SMA 22 20 14 20 SMA 23 30 21 30 SMA 24 40 28 40 2.0 50.0 0.7 SMA 25 50 35 50 SMA 26 60 42 60 units V V V A A V mA ºC /W Typical Thermal Resistance (Note 2) Storage and Operating Temperature ºC NOTES: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) P.C.B. mounted with 0.2 x 0.2?(5.0 x 5.0mm) copper pad areas Rev.4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SMA22 THRU SMA26 1 1 Rev.4 www.gulfsemi.com