SR1D-E

SR1D-E SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：200V CURRENT： 1.0A FEATURE Ideal for surface mount automotive applications High temperature metallurgic ally bonded construction Capability of meeting environmental standard of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed 450℃/5sec at terminal Complete device submersible temperature of 265℃ for 10 seconds in solder bath Halogen Free GF1/DO-214BA MECHANICAL DATA Terminal: Solder plated, solderable per MIL-STD 202, method 208C Case: Molded with UL-94 class V-0 recognized Halogen Free Epoxy over Glass Polarity : color band denotes cathode end Mounting positio n: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified current TL =120℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A Maximum full load reverse current full cycle average Ta = 55℃ Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Trr Cj Rth(ja) Rth(jl) Tstg, Tj SR1D-E 200 140 200 1.0 30.0 1.3 50.0 5.0 100.0 150 8.5 85.0 28.0 -65 to +175 Units V V V A A V μA μA nS pF ℃/ W ℃ Storage and Operating Junction Temperature Range Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied Vr=4.0V 3. Thermal Resistance from Junction to Ambient and from junction to lead, P.C.B. Mounted on 0.2×0.2″(5.0×5.0mm) copper pad areas Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SR1D-E Rev.A1 www.gulfsemi.com