SS1J

SS1A THRU SS1M SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 1.0A FEATURE For surface mounted application High temperature metallurgic ally bonded Sintered glass junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 450℃/10sec/at terminal／complete device Submersible temperature of 265℃ for 10sec GF1/ DO-214BA MECHANICAL DATA Terminal：Plated Terminal, solderable per MIL-STD 202, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass Polarity：color band denotes cathode end Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single—phase, half —wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Ta =25℃ Maximum full load reverse current full cycle average at 75℃ ambient Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Typical Junction Capacitance Typical Thermal Resistance (Note 1) (Note 2) Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Cj R(ja) Tst, Tj 1.1 30.0 5.0 50.0 15.0 80.0 -65 to +175 SS 1A 50 35 50 SS 1B 100 70 100 SS 1D 200 140 200 SS 1G 400 280 400 1.0 30.0 1.2 SS 1J 600 420 600 SS 1K 800 560 800 SS 1M 1000 700 1000 units V V V A A V μA μA μA pF ℃/W ℃ Operating and Storage Temperature Range Note： Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc Thermal Resistance from Junction to Ambient 6.0mm2 copper pad to each terminal Rev.A4 RATINGS AND CHARACTERISTIC CURVES SS1A THRU SS1M www.gulfsemi.com 1 1 Rev.A4 www.gulfsemi.com