SU1B

SU1A THRU SU1M SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 1.0A FEATURE Ideal for surface mount automotive applications High temperature metallurgically bonded construction Capability of meeting environmental standard of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed 450℃/5sec at terminal Complete device submersible temperature of 265℃ for 10 seconds in solder bath GF1/DO-214BA MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD 202, method 208C Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy over Glass Polarity：color band denotes cathode end Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified current TL =120℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A Maximum full load reverse current full cycle average Ta = 55℃ Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir(av) Ir Trr Cj R(-)JA R(-)JL Tstg, Tj SU 1A 50 35 50 SU 1B 100 70 100 SU 1D 200 140 200 SU 1G 400 280 400 1.0 30.0 SU 1J 600 420 600 SU 1K 800 560 800 SU 1M 1000 700 1000 Units V V V A A 1.0 1.4 50.0 10.0 50.0 50 8.5 85.0 28.0 -65 to +175 1.7 V μA μA μA 75 nS pF ℃/W Storage and Operating Junction Temperature Range Note： ℃ 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied Vr=4.0V 3. Thermal Resistance from Junction to Ambient and from junction to lead, P.C.B. Mounted on 0.2×0.2″(5.0×5.0mm) copper pad areas1 1 Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SU1A THRU SU1M 2 2 Rev.A5 www.gulfsemi.com