SUF4007

SUF4001 THRU SUF4007 HIGH EFFICIENT PLASTIC SILICON RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.0A FEATURE Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension DO -41\DO-204AL MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 1A Peak Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =100°C Vrrm Vrms Vdc If(av) Ifsm Vf SUF 4001 50 35 50 SUF 4002 100 70 100 SUF 4003 200 140 200 SUF 4004 400 280 400 1.0 30.0 SUF 4005 600 420 600 SUF 4006 800 560 800 SUF 4007 1000 700 1000 units V V V A A 1.0 1.4 10.0 100.0 50 15 50 -50 to +125 1.7 V µA µA Ir Trr Cj R(ja) Tstg,Tj Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature 75 12 60 nS pF °C/W °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SUF4001 THRU SUF4007 1 1 Rev.A4 www.gulfsemi.com