UERP05D

UERP05D Ultra fast Plastic Power Rectifiers VOLTAGE: 200V CURRENT:5.0A FEATURE • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction •High voltage and high reliability • High speed switching • Low forward voltage ITO-220AB MECHANICAL DATA Case: JEDEC ITO-220AB molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward Current at 2.5A per leg Maximum Reverse Recovery Time (Note 1) Ta =25°C Ta =125°C Typical thermal resistance junction to case Maximum DC Reverse Current at rated DC blocking voltage Vrrm Vrms Vdc If(av) Ifsm Vf Trr RθJc Ir Tstg, Tj UERP05D 200 140 200 5.0 45 0.98 35 2.3 10 100 -55 to +150 units V V V A A V nS ° C/W µA µA Storage and Operating Temperature Range °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UERP05D Rev.A1 www.gulfsemi.com