UF4007E

UF4001E THRU UF4007E ULTRAFAST EFFICIENT PLASTIC SILICON RECTIFIER VOLTAGE：50 TO 1000V CURRENT： 1.0A FEATURE Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension A-405 MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Typical Thermal Resistance Ta =25°C Ta =125°C (Note 1) (Note 2) (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj R(ja) Tstg, Tj UF40 01E 50 35 50 UF40 02E 100 70 100 UF40 03E 200 140 200 UF40 04E 400 280 400 1.0 30.0 UF40 05E 600 420 600 UF40 06E 800 560 800 UF40 07E 1000 700 1000 units V V V A A 1.0 10.0 100.0 50 17.0 60.0 -55 to +150 1.7 V Maximum Reverse Recovery Time 75 µA µA 75 pF °C /W Storage and Operating Temperature Range °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UF4001E THRU UF4007E 1 Rev.A2 www.gulfsemi.com