UF5407-E

UF5400-E thru UF5408-E ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER Voltage: 50 to 1000V Current: 3.0A FEATURE Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension Halogen Free DO-201AD MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Halogen Free Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25° unless otherwise stated, C, for capacitive load, derate current by 20%) Symbol Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8" lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at Rated forward current Maximum DC Reverse Current Ta =25° C At rated DC blocking voltage Ta =125° C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance Typical Thermal Resistance (Note 2) (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(ja) Rth(jl) Tstg, Tj 50 45.0 20.0 8.5 -55 to +150 1.0 10.0 100.0 75 36.0 UF5 400E 50 35 50 UF5 401E 100 70 100 UF5 402E 200 140 200 UF5 403E 300 210 300 UF5 404E 400 280 400 3.0 150.0 1.7 UF5 405E 500 350 500 UF5 406E 600 420 600 UF5 407E 800 560 800 UF5 408E 1000 700 1000 units V V V A A V µA nS pF ℃/W ° C Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient and Junction to Lead with 3/8″lead length, both leads attached to heatsink Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UF5400-E THRU UF5408-E Rev.A1 www.gulfsemi.com