UFS1200

UFS1200 SURFACE MOUNT FAST SWITCHING RECTIFIER VOLTAGE：1200V CURRENT： 1.0A FEATURE Low power loss High surge capability Glass passivated chip junction Fast recovery time for high efficiency High temperature soldering guaranteed 260℃/10sec/at terminals SMA／DO-214AC MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at Ta =55℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 1A Peak Maximum DC Reverse Current Ta =25° C at rated DC blocking voltage Ta =125° C Maximum Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance (Note 1) (Note 2) (Note 3) Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(jl) Tstg,Tj UFS1200 1200 840 1200 1.0 30.0 1.5 10.0 100.0 100 17.0 30 -55 to +150 units V V V A A V µA nS pF ℃/W ℃ Storage and Operating Junction Temperature Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UFS1200 Rev.A1 www.gulfsemi.com