UG1J

UG1J THRU UG1K SUPERFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE：600V to 800V CURRENT： 1.0A FEATURE Low power loss High surge capability Glass passivated chip junction Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension DO –41\DO-204AL MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 750, method 2026 Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at Ta =35℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8″lead length, P.C. Board Mounted UG1J 600 420 600 1.0 35 1.5 5.0 200.0 25 25.0 50.0 -55 to +150 UG1K 800 560 800 units V V V A A Vrrm Vrms Vdc If(av) Ifsm Vf Ir Trr Cj Rth(ja) Tstg,Tj 2.5 V µA nS pF ℃/W ℃ Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UG1J THRU UG1K Rev.A1 www.gulfsemi.com