A8406-38

IMAGE SENSOR Frame grabber cables A8406 series Various types of cables for frame grabber A flat panel sensor adopting parallel video output requires a frame grabber cable for transmitting the digital video data to a frame grabber card installed in PC. Frame grabber cables A8406 series are cables that connect the flat panel sensor to a frame grabber. A8406 series have high performance and high reliability as digital video cables, and they are also designed for EMC conformity. The wires are covered by double shielding and they have ferrite cores. Refer to the datasheet for the flat panel sensor and choose a suitable cable for it. s Selection guide Cable type No. Cable length A8406-31 5m A8406-36 7m A8406-37 10 m A8406-38 12 m A8406-41 5m A8406-46 7m General-purpose A8406-47 10 m A8406-48 12 m A8406-51 5m A8406-56 7m A8406-57 10 m A8406-58 12 m A8406-32 5m A8406-33 7m A8406-34 10 m A8406-35 12 m A8406-42 5m A8406-43 7m IMAQ PCI-1424 *1 A8406-44 10 m IMAQ PCI-1422 *1 A8406-45 12 m A8406-52 5m A8406-53 7m A8406-54 10 m A8406-55 12 m A8406-62 5m A8406-64 10 m *1: Made by NI (National Instrument Corporation) *2: Made by JAE (Japan Aviation Electronics Industry, Limited) *3: Made by Honda Tsushin Kogyo Co. Ltd. *4: Made by 3M Co. Ltd. Frame grabber Cable end TX20A-36PH1-D2P1-D1E *2 PCS-E80FA *3 open 10140-6000EL *4 TX20A-36PH1-D2P1-D1E *2 PCS-E80FA *3 PCS-XE100MA+ *3 10140-6000EL *4 PCS-XE68MA+ *3 1 Frame grabber cables A8406 series Cable for general frame grabber A8406-31/-36/-37/-38 A8406-31/-36/-37/-38 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 36-pin plug mating with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame grabber to be used. s Cable color coding and specifications Pin No. Signal Cable color Marking color Pin No. Signal Cable color Marking color 1 Data12+ (MSB) Blue 19 Data12- (MSB) Orange 2 Data11+ Green 20 Data11Brown 3 Data10+ Gray 21 Data10Red 4 Data9+ Black 22 Data9Yellow 5 Data8+ Pink 23 Data8Purple 6 Data7+ White 24 Data7Blue Red (1) 7 Data6+ Orange White (1) 25 Data6Green White (1) 8 Data5+ Brown White (1) 26 Data5Gray White (1) 9 Data4+ Red White (1) 27 Data4Black White (1) 10 Data3+ Yellow Black (1) 28 Data3Pink Black (1) 11 Data2+ Purple White (1) 29 Data2White Blue (1) 12 Data1+ (LSB) Blue Red (2) 30 Data1- (LSB) Orange White (2) 13 Reserved *5 Green White (2) 31 GND Brown White (2) 14 Reserved *5 Gray White (2) 32 GND Red White (2) 15 ExtTrgGrb (TTL) Black White (2) 33 IntExt (TTL) Yellow Black (2) 16 Vsync+ Pink Black (2) 34 VsyncPurple White (2) 17 Hsync+ White Blue (2) 35 HsyncBlue Black (1) 18 Pclk+ Orange Black (1) 36 PclkGreen Black (1) Note) Numbers in parentheses of “Marking color” item show marking number. *5: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. s Dimensional outline (unit: mm) a 18 36 36-PIN CABLE FERRITE CORE 1 TX20A-36PH1-D2P1-D1E 19 Cable type No. A8406-31 A8406-36 A8406-37 A8406-38 a 5000 ± 140 7000 ± 140 10000 ± 200 12000 ± 200 KACCA0096EC 2 Frame grabber cables A8406 series Cable for general frame grabber A8406-41/-46/-47/-48 A8406-41/-46/-47/-48 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 80-pin plug mating with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame grabber to be used. s C able color coding and specifications Pin No. Signal Cable color Marking Pin No. Signal color 41 B_Data1+ (LSB) 42 B_Data1- (LSB) 43 B_Data2+ 44 B_Data245 B_Data3+ 46 B_Data347 B_Data4+ 48 B_Data449 B_Data5+ 50 B_Data551 B_Data6+ Red (1) 52 B_Data6W hite (1) 53 B_Data7+ W hite (1) 54 B_Data7W hite (1) 55 B_Data8+ W hite (1) 56 B_Data8W hite (1) 57 B_Data9+ W hite (1) 58 B_Data9Black (1) 59 B_Data10+ Black (1) 60 B_Data10W hite (1) 61 B_Data11+ Blue (1) 62 B_Data11Red (2) 63 B_Data12+ * 6 W hite (2) 64 B_Data12- * 6 W hite (2) 65 B_Data13+ W hite (2) 66 B_Data13W hite (2) 67 B_Data14+ * 7 W hite (2) 68 B_Data14- * 7 W hite (2) 69 Reserved Black (2) 70 Reserved Black (2) 71 Reserved W hite (2) 72 Reserved Blue (2) 73 E xtTrgG rb (TTL) Black (1) 74 Reserved Black (1) 75 Reserved * 8 Black (1) 76 Reserved Black (1) 77 Reserved * 8 Black (1) 78 Reserved Black (1) 79 GND Red (1) 80 GND color ” i tem show m arking num ber. Cable color Marking color 1 A_Data1+ (LSB) Blue Pink Red (1) 2 A_Data1- (LSB) O range Purple Black (1) 3 A_Data2+ G reen W hite Black (1) 4 A_Data2Brown Blue Black (2) 5 A_Data3+ G ray O range Black (2) 6 A_Data3Red G reen Black (2) 7 A_Data4+ Black Brown Black (2) 8 A_Data4Yellow G ray Black (2) 9 A_Data5+ Pink Red Black (2) 10 A_Data5Purple Yellow Red (2) 11 A_Data6+ W hite Pink Red (2) 12 A_Data6Blue Purple Yellow (2) 13 A_Data7+ O range W hite Yellow (1) 14 A_Data7G reen Blue Yellow (1) 15 A_Data8+ Blown O range Yellow (1) 16 A_Data8G ray G reen Yellow (1) 17 A_Data9+ Red Brown Yellow (1) 18 A_Data9Black G ray Yellow (1) 19 A_Data10+ Yellow Red Yellow (1) 20 A_Data10Pink Yellow Blue (1) 21 A_Data11+ Purple Pink Yellow (1) 22 A_Data11W hite Purple Yellow (1) 23 A_Data12+ * 6 Blue W hite Yellow (2) 24 A_Data12- * 6 O range Blue O range (1) 25 A_Data13+ G reen O range Yellow (2) 26 A_Data13Brown G reen Yellow (2) 27 A_Data14+ * 7 G ray Brown Yellow (2) 28 A_Data14- * 7 Red G ray Yellow (2) 29 Reserved Black Red O range (1) 30 Reserved Yellow Yellow Blue (2) 31 Reserved Pink Pink Yellow (2) 32 Reserved Purple Purple Blue (2) 33 IntExt (TTL) W hite W hite O range (1) 34 Reserved Blue Blue O range (2) 35 Vsync+ O range G reen O range (1) 36 VsyncG reen Brown O range (1) 37 Hsync+ Brown G ray O range (1) 38 HsyncG ray Red O range (2) 39 Pclk+ Red Pink O range (1) 40 PclkYellow Purple O range (1) Note) Num bers in parentheses of “ Marking *6: MSB for 12 bit *7: MSB for 14bit *8: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. s Dimensional outline (unit: mm) a PCS-E80FA 1 41 80-PIN CABLE FERRITE CORE 40 80 Cable type No. A8406-41 A8406-46 A8406-47 A8406-48 a 5000 ± 140 7000 ± 140 10000 ± 200 12000 ± 200 PCS-E80LKPA KACCA0138EB 3 Frame grabber cables A8406 series Cable for general frame grabber A8406-51/-56/-57/-58 A8406-51/-56/-57/-58 are cables that connect the flat panel sensor to a general frame grabber. One end of this cable has a 40-pin plug mating with the flat panel sensor digital output receptacle, but the other end is left open. Connect the open end to a plug that mates with the frame grabber to be used. s Cable color coding and specifications Pin No. Signal Cable color Marking color Pin No. Signal Cable color Marking color 1 Data1+ (LSB) Blue 21 Data1- (LSB) Orange 2 Data2+ Green 22 Data2Brown 3 Data3+ Gray 23 Data3Red 4 Data4+ Black 24 Data4Yellow 5 Data5+ Pink 25 Data5Purple 6 Data6+ White 26 Data6Blue Red (1) 7 Data7+ Orange White (1) 27 Data7Green White (1) 8 Data8+ Brown White (1) 28 Data8Gray White (1) 9 Data9+ Red White (1) 29 Data9Black White (1) 10 Data10+ Yellow Black (1) 30 Data10Pink Black (1) 11 Data11+ Purple White (1) 31 Data11White Blue (1) 12 Data12+ *9 Blue Red (2) 32 Data12- *9 Orange White (2) 13 Data13+ Brown Black (1) 33 Data13Gray Black (1) 14 Data14+ *10 Red Black (1) 34 Data14- *10 Yellow Red (1) 15 Reserved *11 Green White (2) 35 GND Brown White (2) 16 Reserved *11 Gray White (2) 36 GND Red White (2) 17 ExtTrgGrb (TTL) Black White (2) 37 IntExt (TTL) Yellow Black (2) 18 Vsync+ Pink Black (2) 38 VsyncPurple White (2) 19 Hsync+ White Blue (2) 39 HsyncBlue Black (1) 20 Pclk+ Orange Black (1) 40 PclkGreen Black (1) Note) Numbers in parentheses of “Marking color” item show marking number. Unless otherwise is not described, signal level is LVDS *9: MSB for 12 bit *10: MSB for 14 bit *11: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. s Dimensional outline (unit: mm) a 10140-A200-00 20 40 40-PIN CABLE FERRITE CORE 10140-60000EL Cable type No. A8406-51 A8406-56 A8406-57 A8406-58 a 5000 ± 140 7000 ± 140 10000 ± 200 12000 ± 200 1 21 KACCA0174EA 4 Frame grabber cables A8406 series Cable for IMAQ PCI-1424/ IMAQ PCI-1422 frame grabber A8406-32/-33/-34/-35 A8406-32/-33/-34/-35 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 36-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and PCI-1422. s Pin connection for A8406-32 TX20A-36PH1-D2P1-D1E PCS-XE100MA+ TX20A-36PH1-D2P1-D1E PCS-XE100MA+ Signal Signal Pin No. Pin No. Pin No. Pin No. 1 Data12+ (MSB) 23 19 Data12- (MSB) 24 2 Data11+ 21 20 Data1122 3 Data10+ 19 21 Data1020 4 Data9+ 17 22 Data918 5 Data8+ 15 23 Data816 6 Data7+ 13 24 Data714 7 Data6+ 11 25 Data612 8 Data5+ 9 26 Data510 9 Data4+ 7 27 Data48 10 Data3+ 5 28 Data36 11 Data2+ 3 29 Data24 12 Data1+ (LSB) 1 30 Data1- (LSB) 2 13 Reserved *12 33 31 GND 99 14 Reserved *12 35 32 GND 100 15 ExtTrgGrb (TTL) 37 33 IntExt (TTL) 39 16 Vsync+ 41 34 Vsync42 17 Hsync+ 43 35 Hsync44 18 Pclk+ 49 36 Pclk50 *12: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets of the flat panel sensors. The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that matches the output type of the flat panel sensor. s Dimensional outline (unit: mm) PCS-XE100MA+ a 18 36 51 1 1 19 36-PIN CABLE FERRITE CORE 100 50 TX20A-36PH1-D2P1-D1E PCS-XEM100LU2 Cable type No. A8406-32 A8406-33 A8406-34 A8406-35 a 5000 ± 140 7000 ± 140 10000 ± 200 12000 ± 200 KACCA0097EC 5 Frame grabber cables A8406 series Cable for IMAQ PCI-1424/ IMAQ PCI-1422 frame grabber A8406-42/-43/-44/-45 A8406-42/-43/-44/-45 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 80-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422. s P in c o n n e c tio n fo r A 8 4 0 6 -4 2 P C S -E 8 0 FA P C S -X E 1 0 0 M A + P C S -E 8 0 FA P C S -X E 1 0 0 M A + S ig n a l S ig n a l P in N o . P in N o . P in N o . P in N o . 1 A _ D a ta 1 + (L S B ) 1 41 B _ D a ta 1 + (L S B ) 51 2 A _ D a ta 1 - (L S B ) 2 42 B _ D a ta 1 - (L S B ) 52 3 A _ D a ta 2 + 3 43 B _ D a ta 2 + 53 4 A _ D a ta 2 4 44 B _ D a ta 2 54 5 A _ D a ta 3 + 5 45 B _ D a ta 3 + 55 6 A _ D a ta 3 6 46 B _ D a ta 3 56 7 A _ D a ta 4 + 7 47 B _ D a ta 4 + 57 8 A _ D a ta 4 8 48 B _ D a ta 4 58 9 A _ D a ta 5 + 9 49 B _ D a ta 5 + 59 10 A _ D a ta 5 10 50 B _ D a ta 5 60 11 A _ D a ta 6 + 11 51 B _ D a ta 6 + 61 12 A _ D a ta 6 12 52 B _ D a ta 6 62 13 A _ D a ta 7 + 13 53 B _ D a ta 7 + 63 14 A _ D a ta 7 14 54 B _ D a ta 7 64 15 A _ D a ta 8 + 15 55 B _ D a ta 8 + 65 16 A _ D a ta 8 16 56 B _ D a ta 8 66 17 A _ D a ta 9 + 17 57 B _ D a ta 9 + 67 18 A _ D a ta 9 18 58 B _ D a ta 9 68 19 A _ D a ta 1 0 + 19 59 B _ D a ta 1 0 + 69 20 A _ D a ta 1 0 20 60 B _ D a ta 1 0 70 21 A _ D a ta 11 + 21 61 B _ D a ta 11 + 71 22 A _ D a ta 11 22 62 B _ D a ta 11 72 23 A _ D a ta 1 2 + * 1 3 23 63 B _ D a ta 1 2 + * 1 3 73 24 A _ D a ta 1 2 - * 1 3 24 64 B _ D a ta 1 2 - * 1 3 74 25 A _ D a ta 1 3 + 25 65 B _ D a ta 1 3 + 75 26 A _ D a ta 1 3 26 66 B _ D a ta 1 3 76 14 14 27 A _ D a ta 1 4 + * 27 67 B _ D a ta 1 4 + * 77 28 A _ D a ta 1 4 - * 1 4 28 68 B _ D a ta 1 4 - * 1 4 78 29 R e s e rv e d 95 69 R e s e rv e d 97 30 R e s e rv e d 70 R e s e rv e d 31 R e s e rv e d 96 71 R e s e rv e d 98 32 R e s e rv e d 72 R e s e rv e d 33 In tE x t (T T L ) 39 73 E xtTrg G rb ( T T L ) 37 34 R e s e rv e d 40 74 R e s e rv e d 38 35 V sync+ 41 75 R e s e rv e d * 1 5 33 36 V sync42 76 R e s e rv e d 34 15 37 H sync+ 43 77 R e s e rv e d * 35 38 H sync44 78 R e s e rv e d 36 39 P c lk + 49 79 GND 99 40 P c lk 50 80 GND 100 *1 3 : M S B fo r 1 2 b it *1 4 : M S B fo r 1 4 b it *1 5 : T h e s ig n a ls c o n n e c te d to th e s e p in s d e p e n d o n e a c h d e v ic e s . R e fe r to th e d a ta s h e e t fo r th e fla t p a n e l s e n s o r. N o te ) T h e IM A Q P C I-1 4 2 2 fr a m e g ra b b e r b o a rd m a y n o t b e c o m p a tib le w ith a fe w ty p e s o f H A M A M AT S U fla t p a n e l s e n s o rs . T h e c o m p a tib ility s h o u ld b e a s k e d to N a tio n a l In s tru m e n ts C o rp o ra tio n (h ttp ://w w w.n i.c o m /) w ith re fe re n c e to d a ta s h e e ts o f th e fla t p a n e l s e n s o rs . T h e tw o ty p e s o f o u tp u t a re a v a ila b le w ith fla t p a n e l s e n s o rs : R S -4 2 2 a n d LV D S . S e le c t a d ig ita l fra m e g ra b b e r th a t m a tc h e s th e o u tp u t ty p e o f th e fla t p a n e l s e n s o r. s Dimensional outline (unit: mm) PCS-E80LKPA a PCS-XE100MA+ 51 1 1 41 40 80 80-PIN CABLE Cable type No. a 5000 ± 140 7000 ± 140 10000 ± 200 12000 ± 200 KACCA0139EB FERRITE CORE 100 50 A8406-42 A8406-43 A8406-44 A8406-45 PCS-E80FA PCS-XEM100LU2 6 Frame grabber cables A8406 series Cable for IMAQ PCI-1424/ IMAQ PCI-1422 frame grabber A8406-52/-53/-54/-55 A8406-52/-53/-54/-55 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 80-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422. s Pin connection for A8406-52 TX20A-36PH1-D2P1-D1 PCS-XE100MA+ TX20A-36PH1-D2P1-D1 PCS-XE100MA+ Signal Signal Pin No. Pin No. Pin No. Pin No. 1 Data1+ (LSB) 1 21 Data1- (LSB) 2 2 Data2+ 3 22 Data24 3 Data3+ 5 23 Data36 4 Data4+ 7 24 Data48 5 Data5+ 9 25 Data510 6 Data6+ 11 26 Data612 7 Data7+ 13 27 Data714 8 Data8+ 15 28 Data816 9 Data9+ 17 29 Data918 10 Data10+ 19 30 Data1020 11 Data11+ 21 31 Data1122 12 Data12+ *16 23 32 Data12- *16 24 13 Data13+ 25 33 Data1326 14 Data14+ *17 27 34 Data14- *17 28 15 Reserved *18 33 35 GND 99 16 Reserved *18 35 36 GND 100 17 ExtTrgGrb (TTL) 37 37 IntExt (TTL) 39 18 Vsync+ 41 38 Vsync42 19 Hsync+ 43 39 Hsync44 20 Pclk+ 49 40 Pclk50 *16: MSB for 12 bit *17: MSB for 14 bit *18: The signals connected to these pins depend on each devices. Refer to the datasheet for the flat panel sensor. Note) The IMAQ PCI-1422 frame grabber board may not be compatible with a few types of HAMAMATSU flat panel sensors. The compatibility should be asked to National Instruments Corporation (http://www.ni.com/) with reference to datasheets of the flat panel sensors. The two types of output are available with flat panel sensors: RS-422 and LVDS. Select a digital frame grabber that matches the output type of the flat panel sensor. s Dimensional outline (unit: mm) PCS-XE100MA+ a 20 40 51 1 1 21 40-PIN CABLE 100 10140-60000EL PCS-XEM100LU2 50 Cable type No. A8406-52 A8406-53 A8406-54 A8406-55 a 5000 ± 140 7000 ± 140 10000 ± 200 12000 ± 200 KACCA0175EA 7 Frame grabber cables A8406 series Cable for IMAQ PCI-1424/IMAQ PCI-1422 frame grabber A8406-62/-64 A8406-62/-64 cable are designed to connect the flat panel sensor to the National Instrument IMAQ PCI-1424 and IMAQ PCI-1422 digital frame grabber board. Both ends of this cable have connectors. One end is a 68-pin plug mating with the flat panel sensor digital output receptacle, while the other end is a 100-pin plug for the IMAQ PCI-1424 and IMAQ PCI-1422. s P in c o n n e c tio n fo r A 8 4 0 6 - 6 2 /- 6 4 P C S -X E 6 8 M A + P C S -X E 1 0 0 M A + P C S -X E 6 8 M A + P C S -X E 1 0 0 M A + S ig n a l S ig n a l P in N o . P in N o . P in N o . P in N o . 1 A _ D a ta 1 + (L S B ) 1 35 A _ D a ta 1 - (L S B ) 2 2 A _ D a ta 2 + 3 36 A _ D a ta 2 4 3 A _ D a ta 3 + 5 37 A _ D a ta 3 6 4 A _ D a ta 4 + 7 38 A _ D a ta 4 8 5 A _ D a ta 5 + 9 39 A _ D a ta 5 10 6 A _ D a ta 6 + 11 40 A _ D a ta 6 12 7 A _ D a ta 7 + 13 41 A _ D a ta 7 14 8 A _ D a ta 8 + 15 42 A _ D a ta 8 16 9 A _ D a ta 9 + 17 43 A _ D a ta 9 18 10 A _ D a ta 1 0 + 19 44 A _ D a ta 1 0 20 11 A _ D a ta 11 + 21 45 A _ D a ta 11 22 12 A _ D a ta 1 2 + 23 46 A _ D a ta 1 2 24 13 A _ D a ta 1 3 + * 1 9 25 47 A _ D a ta 1 3 - * 1 9 26 20 20 14 A _ D a ta 1 4 + * 27 48 A _ D a ta 1 4 - * 28 15 B _ D a ta 1 + (L S B ) 51 49 B _ D a ta 1 - (L S B ) 52 16 B _ D a ta 2 + 53 50 B _ D a ta 2 54 17 B _ D a ta 3 + 55 51 B _ D a ta 3 56 18 B _ D a ta 4 + 57 52 B _ D a ta 4 58 19 B _ D a ta 5 + 59 53 B _ D a ta 5 60 20 B _ D a ta 6 + 61 54 B _ D a ta 6 62 21 B _ D a ta 7 + 63 55 B _ D a ta 7 64 22 B _ D a ta 8 + 65 56 B _ D a ta 8 66 23 B _ D a ta 9 + 67 57 B _ D a ta 9 68 24 B _ D a ta 1 0 + 69 58 B _ D a ta 1 0 70 25 B _ D a ta 11 + 71 59 B _ D a ta 11 72 26 B _ D a ta 1 2 + 73 60 B _ D a ta 1 2 74 27 B _ D a ta 1 3 + * 1 9 75 61 B _ D a ta 1 3 - * 1 9 76 28 B _ D a ta 1 4 + * 2 0 77 62 B _ D a ta 1 4 - * 2 0 78 29 R e s e rv e d * 2 1 33 63 GND 99 30 R e s e rv e d * 2 1 35 64 GND 100 31 E x tT rg G rb ( T T L ) 37 65 In tE x t (T T L ) 39 32 V sync+ 41 66 V sync42 33 H sync+ 43 67 H sync44 34 P c lk + 49 68 P c lk 50 * 1 9 : M S B fo r 1 3 b it * 2 0 : M S B fo r 1 4 b it * 2 1 : T h e s ig n a ls c o n n e c te d to th e s e p in s d e p e n d o n e a c h d e v ic e s . R e fe r to th e d a ta s h e e t fo r th e fla t p a n e l s e n s o r.  N o te : T h e IM A Q P C I-1 4 2 2 fra m e g ra b b e r b o a rd m a y n o t b e c o m p a tib le w ith a fe w ty p e s o f H A M A M A T S U fla t p a n e l s e n s o rs . T h e c o m p a tib ility s h o u ld b e a s k e d to N a tio n a l In s tru m e n ts C o rp o ra tio n (h ttp ://w w w .n i.c o m /) w ith re fe re n c e to d a ta s h e e ts o f th e fla t p a n e l s e n s o rs . T h e tw o t y p e s o f o u tp u t a re a v a ila b le w ith fla t p a n e l s e n s o rs : R S -4 2 2 a n d LV D S . S e le c t a d ig ita l fra m e g ra b b e r th a t m a tc h e s th e o u tp u t ty p e o f th e fla t p a n e l s e n s o r. s Dimensional outline (unit: mm) PCS-XE100MA+ PCS-E68LKPB a 51 1 34 1 68 35 68-PIN CABLE FERRITE CORE Cable Type No. a 5000 ± 140 10000 ± 200 KACCA0226EB 100 PCS-XE68MA+ PCS-XEM100LU2 50 A8406-62 A8406-64 Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 8 Cat. No. KACC1123E02 Oct. 2007 DN