C10373

HIGH PERFORMANCE THERMOELECTRIC COOLERS C10372, C10373 SERIES The C10372 series and C10373 series are water-cooled thermoelectric coolers designed to reduce thermal electrons emitted from the photocathode of photomultiplier tubes (PMTs) in order to improve signal-to-noise ratio (S/N ratio). The C10372 series further contains an electrostatic and magnetic shield that minimizes the influence of the ambient environment. The C10372 series are for 28 mm, 38 mm and 51 mm diameter head-on PMTs, while the C10373 series are for MCP-PMTs. FEATURES G Thermoelectric cooling using peltier module G About -30 °C cooling temperature (with +20 °C cooling water) G Evacuated, double-pane window with heater for frost prevention G Built-in electrostatic and magnetic shielding (C10372 series) G Internal protective circuit safeguards Peltier element module in case of low water G Internal protection circuits prevent output short-circuit, output overvoltage, and excessive temperature rise in power supply G Stable operation due to a regulated power supply Left: Power Supply Right: Cooled PMT Housing SPECIFICATIONS COOLED PMT HOUSING Parameter Description / Value Cooling Method Thermoelectric cooling using peltier module Heat Exchange Medium Water Amount of Cooling Water 1 L/min to 3 L/min (water pressuere: below 0.3 MPa) Cooling Temperature (with cooling water at +20 °C) Approx. -30 °C Temperature Controllable Range (with cooling water at +20 °C) -30 °C to 0 °C (continuously adjustable) Cooling Time Approx. 120 min Evacuated double-pane synthetic silica window with heater (185 nm to 2200 nm) Optical Window Material 28 mm (1-1/8") Dia., 38 mm (1-1/2") Dia. and 51 mm (2") Dia. Head-on C10372 series Applicable PMTs (sold separately) MCP-PMT (R3809U-50 Series, R3809U-61/-63/-64) C10373 series Applicable Socket Assembly (sold separately) C10372 series E2762 Series A Applicable PMT Holder (sold separately) C10373 series E3059-500 (R3809U-50 Seriess, R3809U-61/-63/-64) Operating Ambient Temperature / Humidity B +5 °C to +40 °C / Below 75 % Storage Temperature / Humidity B -15 °C to +50 °C / Below 80 % Weight C10372 5.8 kg / C10373 5.5 kg NOTE: ASee P.2 BNo condensation POWER SUPPLY AC Input Voltage Power Consumption Output Voltage Output Current Protection Circuit Operating Ambient Temperature / Humidity B Storage Temperature / Humidity B Weight NOTE: BNo condensation Parameter C10372, C10373 C10372-01, C10373-01 C10372-02, C10373-02 Description / Value 100 V ± 10 V (50 Hz / 60 Hz) 120 V ± 12 V (50 Hz / 60 Hz) 240 V ± 24 V (50 Hz / 60 Hz) 200 V·A 24 V to 27 V 4.2 A Protective circuits to safeguard Peltier element module in case of low water and to prevent output short-circuit, output overvoltage, and excessive temperature rise in power supply. +5 °C to +40 °C / Below 75 % -15 °C to +50 °C / Below 80 % 2.1 kg GCooled PMT housing (Including an input window) GPower supply GLight shield cap GWater hose clamps (2 pcs) GConnection cable (1.5 m) GAC line cable (2.5 m: -02 type, 2.0 m: other types) GSocket assembly / PMT holder mounting screw (4 pcs) * To use these coolers, water hoses with an inner diameter of 15 mm and a water supply line with the matching round faucet are required. Prepare those hoses of the desired length. In addition, prepare a filter for removing impurities such as chlorine ions. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. COMPONENTS AND ACCESSORIES HIGH PERFORMANCE THERMOELECTRIC COOLERS C10372,C10373 SERIES COOLING CHARACTERISTICS COOLING TEMPERATURE (°C) +20 +10 0 -10 -20 -30 -40 COOLING WATER : +20 °C AMBIENT TEMPERATURE : +20 °C SPECTRAL TRANSMISSION CHARACTERISTICS OF OPTICAL WINDOW 100 90 80 TACCB0101EA MAXIMUM COOLING TEMPERATURE (°C) +30 TACCB0034EA -10 TACCB0100EA TRANSMITTANCE (%) -20 70 60 50 40 30 20 10 -30 -40 0 20 40 60 80 100 120 -50 0 +10 +20 +30 0 200 300 400 500 600 700 800 TIME (min) COOLING WATER TEMPERATURE (°C) WAVELENGTH (nm) DIMENSIONAL OUTLINE (Unit: mm) HOUSING 180 POWER SUPPLY 104.0 ± 1.5 53 160 200 4-M4 30 8 215 275 50 +2 -0 8 6-M3 35 MAX. 16 RC 1/8 TAPER SCREW 190 250 64 30 15 190 250 12.5 * The 1 mm thickness of the folded aluminum plate is not included in. 61.5 8 6-M3 S-100 O-RING S-100 O-RING PMT 12 0 PMT 100 100 95 86 52 95 86 52 130 130 12 0 EVACUATED WINDOW WINDOW FLANGE WINDOW FLANGE EVACUATED WINDOW WINDOW FLANGE WINDOW FLANGE HOUSING FRONT PANEL HOUSING FRONT PANEL (C10372 series) TACCA0292EA (C10373 series) TACCA0293EA SOLD SEPARATELY (Unit: mm) Socket Assemblies for C10372 Series E2762 Series SIGNAL OUTPUT: BNC CONNECTOR -HV: SHV CONNECTOR SOCKET HOUSING (INSULATOR) 222 ± 2 192 60 106 73 69 13 119 SIGNAL OUTPUT : SMA CONNECTOR 35 MAX. MCP-PMT Holder for C10373 Series E3059-500 -HV : SHV CONNECTOR 67.2 ± 0.2 R3809U 73 85 ± 5 HIGH VOLTAGE CONTACT RING 119 L 35 MAX. HOUSING (METAL) TACCA0130ED L: E2762-502...133.5 E2762-506...144.5 E2762-509...106.5 E2762-510...106.5 E2762-511...120.5 E2762-513...120.5 * The high voltage contact ring is used for internal electrical connection to the magnetic shield case in the cooler. HOUSING (INSULATOR) HOUSING (METAL) N2 GAS INLET TACCA0133EC NOTE: A E2762 Series E2762-502 E2762-506 E2762-509 E2762-510 E2762-511 E2762-513 PMT R980, R1387, R2066 R943-02, R3310-02 R464, R585, R649 R329-02, R331-05, R2257 R374, R2228, R5929 R375, R669 WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TACC1040E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it 69 SEPT. 2007 IP