C4880-20

DATA SHEET Digital CCD Camera C4880-20 v Hermetic vacuum sealed air-cooled head type v Hermetic vacuum sealed water-cooled head type This camera system is equipped with a CCD manufactured by Hamamatsu. It offers a wide dynamic range due to the large cell size (24 µm × 24 µm) and the extremely large quantity of full well capacity. Furthermore, the use of the MPP (Multi-Pin Phasing) low dark current drive method has reduced the dark current. ❚ SPECTRAL RESPONSE CHARACTERISTICS 40 ❚ APPLICATIONS q q q q Quantum efficiency (%) 30 X-ray scintillator readout Readout of various fluorescences X-ray diffraction readout Neutron radiography 20 10 0 400 500 600 700 800 Wavelength (nm) 900 1000 * This is typical, not guaranteed. ❚ SYSTEM CONFIGURATION Computer CCD S5466 ❚ FEATURES q q Camera head Hermetically vacuum-sealed air-cooled head Camera controller Image acquisition unit (kit) Image input board Software q q q Hermetically vacuum-sealed water-cooled head Circulating water cooler Commercially available software q Wide dynamic range of 25,000 : 1 (typ.) Extremely large full well capacity of 300,000 electrons (typ.) Low readout noise of 12 electrons r.m.s. (typ.) Low dark current Large effective area of 12.29 (H) × 12.29 (V) mm High resolution of 512 (H) × 512 (V) pixels ❚ TYPE NO. C4880-20Bit number on A/D converter 22: Fast scan mode 12-bit High precision scan mode 12-bit 24: Fast scan mode 12-bit High precision scan mode 14-bit 26: Fast scan mode 12-bit High precision scan mode 16-bit Cooling method A: Air-cooling W: Water-cooling ❚ SPECIFICATIONS Model name Camera head type Circulating water cooler Vacuum pump Imaging device Effective no. of pixels Cell size Effective area Readout noise (High-precision scan mode) Full well capacity Dynamic range (High-precision scan mode) Frame rate Cooling method Cooling temperature CCD cooling control Dark current Exposure time A/D converter Lens mount Mechanical shutter Variable analog gain Variable offset Amp gain Binning scan Sub-array scan Super-pixel scan External trigger input Output signal (digital output) External control Ambient storage temperature Ambient operating temperature Ambient operating/storage humidity Line voltage Power consumption Typ. Max. High-precision scan mode Fast scan mode Min. Typ. C4880-20-A C4880-20-W Hermetically vacuum-sealed air-cooled head Hermetically vacuum-sealed water-cooled head Required – – – S5466 Model 1 full-frame transfer CCD 512 (H) × 512 (V) 24 (H) × 24 (V) µm 12.29 (H) × 12.29 (V) mm 8 electrons r.m.s. 12 electrons r.m.s. 300,000 electrons 25,000 : 1 30,000 : 1 0.5 frames/sec (156 kHz/pixel) 7 frames/sec (2.5 MHz/pixel) Peltier cooling / forced-air cooling + hermetic sealing Peltier cooling / water cooling + hermetic sealing -45 to -55 ˚C -60 to -70 ˚C Cooling ON/OFF control, cooling temperature setting function Front panel dial / software-controlled switching; Temperature displayed on front panel LCD 3.0 electrons/pixel/sec 1.5 electrons/pixel/sec 20 ms or more 12 / 14 / 16 bits C-mount Built-in (Control: OPEN / CLOSE / AUTO) Fr ont panel dial / software-controlled switching, 1 - 6 times (high-speed scan) Front panel dial / software-controlled switching (fast scan) 2 steps (fast scan), 3 steps (precision scan) Yes 1/1, 1/2, 1/4, 1/8 (H) × any desired number (V) 2 × 2, 4 × 4, 8 × 8 Yes Parallel digital output (conforms to RS-422) RS-232C -10 to +50 ˚C 0 ˚C to +40 ˚C 70% max. (with no condensation) 100 / 117 / 220 / 240 VAC, 50/60 Hz Approx. 220 VA ❚ DIMENSIONAL OUTLINES q Hermetic vacuum sealed air-cooled head (approx. 2.5 kg) 120 ± 0.3 6±0.5 239 ± 0.5 q Camera controller (approx. 8.5 kg) DUAL MODE COOLED CCD CAMERA C4880 CONTRAST ENHANCEMENT MENU GAIN OFFSET POWER SELECT RETURN SUB MENU MIN MAX – 0 114 ± 0.5 60 ± 0.3 350±2 412±1 C-mount 40 ± 0.5 20± 0.2 4-M4 D=6 20 ± 0.2 50 ± 0.2 7±1 74±1 3±0.5 20±2 335±2 383±1 1/4-20UNC D=6 2-M6 D=6 20 ±0.2 q Hermetic vacuum sealed water-cooled head (approx. 2.5kg) 120 ± 0.3 6 ± 0.3 216 ± 0.5 q Camera controller (approx. 8.5 kg) DUAL MODE COOLED CCD CAMERA C4880 CONTRAST ENHANCEMENT MENU GAIN OFFSET POWER SELECT RETURN SUB MENU MIN MAX – 0 114 ± 0.5 60 ± 0.3 350±2 412±1 C-mount 40 ± 0.5 20± 0.2 4-M4 D=6 20 ± 0.2 50 ± 0.2 7± 1 74±1 3±0.5 20±2 335±2 383±1 1/4-20UNC D=6 2-M6 D=6 20 ±0.2 ISO 9001 Certificate: 09 105 79045 5 Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers. q q Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office . Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications and external appearance are subject to change without notice. . © 2002 Hamamatsu Photonics K.K. Homepage Address http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Systems Division 812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp U.S.A. and Canada: Hamamatsu Photonic Systems: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-1116, Fax: (1)908-231-0852, E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de , France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW U.K., Telephone: (44) 1707-294888, Fax: (44)1701-325777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se Cat. No. SICS1079E02 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Mois, 1/E 20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it MAR/2002 HPK Created in Japan (PDF)