TENTATIVE DATA SHEET
X-Ray Line Sensor Camera C7390 Series
The C7390 Series X-ray line sensor camera offers high resolution and high sensitivity for capturing finely detailed X-ray images of products or parts moving along on a belt conveyor. X-ray images are obtained in synchronization with external timing signals from the transfer mechanism such as a belt conveyor or by internal timing signals, and are then output as RS-422 digital signals.
FEATURES
q High resolution q Equipment with wider detection areas q Available with 256 mm or 512 mm detector length q Easily connectable to frame grabber board
The signal output method of this X-ray line sensor camera is designed to handle commercially available, digital frame grabber boards.
APPLICATIONS
q Detection of foreign matter in the food processing industry q Presense of dangerous objects in incinerators, like gas bottles, fire extingushers q X-ray tomography for inspection of fuel tanks, moving parts in engines.
SPECIFICATIONS
Scintillator Material Effective X-ray tube voltage range Sensor element pitch Detection width Resolution Line speed A/D conversion Digital Interface External Control Correction functions Operating temperature Storage temperature Operating and storage humidity Line Voltage Power consumption Gd plastic scintillator 40 to 160 kV 0.4 mm 512 mm or 256 mm 512 mm: 1280 pixels 256 mm: 640 pixels 4 to 40 m/min 12 bits RS-422 RS-232C Offset and Brightness 0 to 40°C -10 to +50°C 30 to 80% (no condensation) AC100/117/220/240±10% 50/60Hz Approx. 100VA
SYSTEM CONFIGURATION EXAMPLE
B/W Video Monitor X-ray Source
Sample
X-ray sensor head Commercial Frame Grabber Boad
Camera cable and power cable Data transfer cable* Standard configuration Computer RS-232C cable*
NOTE • The C7390 X-ray line sensor camera consists of a sensor head, sensor control unit and cables. Image display equipment should be ordered separately.
*
Optional
STANDARD CONFIGURATION
q X-ray sensor head ....................................... 1 q Sensor control unit ...................................... 1 q Camera cable (5 meters) ..............................1 q Camera power cable (5 meters) ................... 1 q Power cable (2 meters) ................................. 1 q Accessories (Instruction manual) ................ 1 (Fuse) ........................................ 1
OPTIONAL
q Processor board
This is designed to be installed in a computer and has functions to display an image while scrolling the acquired data, freeze the image at the desired timing and control the sensor head, just as with the above display.
q Data transfer cables
Custom data transfer cables are provided to match the particular application. For example, cables are supplied in lengths of 5, 10 and 20 meters to handle relatively long distances to the video monitor. Please consult with us if even longer cables are needed.
APPLICATION EXAMPLES
• Field pea • Green pepper
• Fish
• Chicken
• Incinerators, like gas bottles
• Shoes
DIMENSIONAL OUTLINE (Unit:mm)
• X-Ray Line Sensor Head (512 mm) (Approx. 9.0 kg)
(35) Sensor position
8– 4.5
11±0.5
(512) Sensor range
5.5±0.3
149±0.3
(37) Sensor position
138±0.5
170±0.3
170±0.3
170±0.3
50±0.5
160±0.5
630±1
• • • •
C7390-01 C7390-06 C7390-11 C7390-16
: : : :
AC100V AC117V AC220V AC240V
± ± ± ±
10% 10% 10% 10%
• X-Ray Line Sensor Head (256 mm) (Approx. 5.0 kg)
(35) Sensor position
4– 4.5
11±0.5
(256) Sensor range
5.5±0.3
(37) Sensor position
149±0.3
138±0.5
254±0.3
50±0.5
160±0.5
374±1
• • • •
C7390-02 C7390-07 C7390-12 C7390-17
: : : :
AC100V AC117V AC220V AC240V
± ± ± ±
10% 10% 10% 10%
• Sensor Camera Control Unit (Approx. 5.0 kg)
CAMERA I/F CAMERA POWER LINE LINE I/F SERIAL I/F
FGBIRS4221
OPTION
CAMERA CONTROLLER
POWER
232±1
7±1
74±1
383±2
• Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult
with our sales office.
• Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications and external appearance are subject to change without notice. © 1998 Hamamatsu Photonics K.K.
Homepage Address http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Systems Division 812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp
U.S.A. and Canada: Hamamatsu Photonic Systems: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-1116, Fax: (1)908-231-0852 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384 North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista, Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95 Cat. No. Italy: Hamamatsu Photonics Italia S.R.L.: Via Della Moia, 1/E 20020 Arese, (Milano), Italy, Telephone: (39)2-935 81 733, Fax: (39)2-935 81 741
SICS1065E03 DEC/98 CR Created in Japan (PDF)