C9052

MODULE Si photodiode evaluation circuit C9052 series Easy-to-use circuit for Si photodiode operation Features Applications l Allows easy evaluation of standard Si photodiodes l On-board circuit examples for typical applications of l Multiple circuits assembled on one board l Support board (C9052-04 with dedicated cable I Absolute maximum rating Parameter Maximum supply voltage Operating temperature Storage temperature Si photodiodes A9053) for processing output signals from head board (C9052-01/-02/-03 with dedicated cable A9053-01) l Testing and evaluation of standard Si photodiodes l Simple optical power meters  Symbol Vcc Max. Topr Tstg C9052-01 ±15 C9052-02 C9052-03 +15 +10 to +40 0 to +50 C9052-04 +12 Unit V °C °C C9052-01 Low noise AC amplifier circuit, photocurrent-to-voltage conversion circuit and wide band amplifier circuit on one board Circuit configuration Features Low noise AC amplifier circuit Low noise AC amplifier circuit using FET, bandwidth 160 to 1 MHz, trans-impedance 15 kV/A Photocurrent-to-voltage Current-to-voltage conversion circuit with bandwidth of DC to 100 kHz and feedback resistance conversion circuit of 100 kW Wide band amplifier circuit Amplifier circuit with bandwidth of DC to 1 MHz and trans-impedance of 30 kV/A Standard Si PIN photodiodes with metal package (TO-18, TO-5, TO-8): S5821 series, etc. C9052-02 Light balance detection circuit, light-to-logarithmic voltage conversion circuit and light integration circuit on one board Circuit configuration Features Detects output balance between two photodiodes when light enters them and outputs the light Light balance detection circuit level difference as a voltage. Light-to-logarithmic voltage Outputs a voltage in proportion to logarithmic change in detected light level conversion circuit Converts input pulsed light of constant cycle into DC signal. Controlled by external integration Light integration circuit reset pulses. Standard Si photodiodes with metal package (TO-18, TO-5, TO-8): S2386 series, etc. Standard Si photodiodes with ceramic package (except -16BQ/-16BK/-16BR types): S1337-1010BR, S1227-1010BR, etc. C9052-03 Two types of light-to-frequency conversion circuits assembled on one board Circuit configuration Features High illuminance type Interface circuit that outputs pulses at frequency proportional to input light from 100 to 10,000 lx. Low illuminance type Interface circuit that outputs pulses at frequency proportional to input light from 1 to 200 lx. S1087 (high illuminance type), S2386-5K (low illuminance type) PRELIMINARY DATA Aug. 2002 1 Si photodiode evaluation circuit C9052-04 C9052 series Power supply circuit for driving C9052-01/-02/-03 and output processing circuit assembled together. Feature Supplies constant voltage to each head board. Power supply circuit C9052-01/-02: ±12 V, C9052-03: +12 V Samples and holds the output signal of head board in synchronization with Sample-and-hold circuit * input light. Peak hold circuit * Holds peak values of head board output signal. Reset pulse generator circuit for integration circuit output. Integration reset circuit Operates in synchronization with input light and sample-and-hold circuit. Monitor circuit for light balance detection circuit. Indicator LED lights up Imbalance indication circuit when difference between two photodiodes exceeds a specified level. Counts the number of output pulses from a frequency conversion circuit Frequency counter circuit and turns on the indicator LED in a lighting cycle according to light level. * The sample-and-hold circuit and peak hold circuit can be selected to replace the jumpsocket. Circuit configuration Connectable product C9052-01/-02/-03 C9052-01/-02 C9052-01/-02 C9052-02 C9052-02 C9052-03 I Circuit connection C9052-01 or C9052-02 or C9052-03 A9053 C9052-04 · OSCILLOSCOPE · VOLTMETER · A/D CONVERTER , etc. NOTE) Photodiode is sold separately. KACCC0183EA I Dimensional outlines (unit: mm) C9052-01/-02/-03 50 PHOTODIODE * (4 ×) 3.2 43 C9052-04 85 (4 ×) 3.2 75 63 COMPONENT MOUNTED SIDE 70 COMPONENT MOUNTED SIDE CONNECTOR * FOR A9053 a * Photodiode and connector for A9053 are sold separately. Mark -01 a (20) -02 -03 CONNECTOR FOR A9053 (20) (12) KACCA0119EA KACCA0120EA I Accessory Dedicated AC adapter (C9052-04 only) Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2002 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 2 Cat. No. KACC1083E03 Nov. 2002 DN 105 95