C9266-03

CCD signal processing module C9266-03/-04 Signal processing module for CCD area image sensor (S10810, S10811) The C9266-03/-04 are signal processing circuit designed for HAMAMATSU CCD area image sensors S10810, S10811. The C926603/-04 can be used in X-ray applications such as X-ray imaging and non-destructive inspection when combined with these CCD area image sensors. The C9266-03/-04 hold a CCD driver circuit, analog video signal processing circuit (12-bit A/D converter), timing generator, control circuit and power supply. The C9266-03/-04 convert analog video signals from a CCD into digital signals and outputs them. The USB connector (USB 2.0) provided as a standard feature easily connects to a PC for the C9266-03/-04 control and data acquisition. No additional power supply for C9266-03/-04 are needed since power is supplied from the PC through the USB connector. The C9266-03/-04 also have a 36-pin MDR connector for connection to a CCD. The C9266-03/-04 case is compact, lightweight and very easy to handle. Application software (C9266DCamAPL) that comes with The C9266-03/-04 allow easy operation from a PC running on Windows 2000/Xp. A function library (DCamLIB.DLL) included with the application software helps you to develop your own software. This software is available with DLL to help you develop your own software programs under various developmental environments. Features Built-in 12-bit AD converter Signal frequency: 1 MHz Adjustable offset Adjustable gain Interface of computer: USB 2.0 Power supply: USB bus power or DC +5 V (C9266-03) USB bus power (C9266-04) Applications Control of X-ray CCD area image sensor (S10810, S10811) and data aquisition Applicable CCD area image sensors The table below shows CCD area image sensors applicable for C9266-03/-04. Since the C9266-03/-04 do not include a CCD area image sensor, so select the desired sensor and order it separately. CCD area image sensor Type no. S10810 S10811 Number of pixels 1508 × 1002 1708 × 1202 Number of active pixels 1500 × 1000 1700 × 1200 Pixel size (μm) 20 × 20 20 × 20 Active area [mm (H) × mm (V)] 30 × 20 34 × 24 www.hamamatsu.com 1 CCD signal processing module C9266-03/-04 Specifications (Typ. Ta=25 °C, unless otherwise noted) Parameter Scanning Frame readout time Data transfer time Total transfer time A/D conversion resolution Conversion gain Readout noise Dynamic range Current consumption Storage temperature Operating temperature Operating humidity Dimension C9266-03 Weight C9266-04 Condition CCD area image sensor S10810 S10811 1 1.62 2.18 1.62 2.17 1.62 2.18 12 48.8 7 585 350 max. -20 to + 70 0 to + 50 70 max. 32 (H) × 115 (W) × 125 (D) Approx. 200 Approx. 170 Unit MHz s s s bit e-/ADU ADU mA °C °C % mm g 4095ADU No condensation Timing chart Internal synchronous mode (“INT” mode) Trigger in (software) Exposure time Exposure signal P1V/P2V P1H/P2H Data acqusition time A/D conversion Data transfer time Data transfer (USB 2.0) Data transfer time Data transfer (USB 1.1) KACCC0510EA External trigger mode 1, 2 (“EXT.EDGE 1, 2” mode) External trigger in (EXT.EDGE 1: from sensor) EXT.EDGE 2: from BNC Exposure signal P1V/P2V Exposure time Dummy scan P1H/P2H Data acquisition time A/D conversion Data transfer time Data transfer (USB 2.0) Data transfer time Data transfer (USB 1.1) Note: “EXT.EDGE 2” mode is not usable in the C9266-04 because there is not a BNC connector. KACCC0511EA 2 CCD signal processing module C9266-03/-04 External trigger mode 3, 4 (EXT.LEVEL 1, 2” mode) External trigger in (EXT.LEVEL 1: from sensor ) EXT.LEVEL 2: from BNC Exposure signal Exposure time Dummy scan P1V/P2V P1H/P2H Data acqusition time A/D conversion Data transfer time Data transfer (USB 2.0) Data transfer time Data transfer (USB 1.1) Note: “EXT.LEVEL 2” mode is not usable in the C9266-04 because there is not a BNC connector. KACCC0512EA Dimensional outlines (unit: mm) C9266-03 DCC 125 115 32 USB EXT.TRIG POWER DC 5 V KACCA0270EA 3 CCD signal processing module C9266-03/-04 C9266-04 CCD 125 115 32 USB KACCA0191EB Pin connections Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 CCD connector (3M 10236-5202JL, 36-pin female) Signal name GND VCC SG TRIGGER RG NC OG NC RD NC OD NC OUT NC GND NC P1V NC Voltage (amplitude) +8 V +13 V 0 V/+12 V +8 V/+13 V 0 V/+12 V +11 V +20 V +23 V Pin no. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Signal name NC P2H NC P1H NC GND NC RD NC OD NC GND NC OUT NC P2V NC TG Voltage (amplitude) 0 V/+12 V 0 V/+12 V +8 V +20 V +23 V +8 V +8 V 0 V/+12 V 0 V/+12 V 0 V/+12 V 4 CCD signal processing module C9266-03/-04 “POWER” connector (DC power jack: compatible with EIAJ RC5320A, voltage class “2”) + There is not an connector in the C9266-04. KACCC0513EA Connection Refer to the following diagram to connect hardware peripherals. Front panel Rear panel DC +5.0 V CCD USB EXT.TRIG POWER DC 5 V CCD S10810, S10811 KACCC0519EA USB 2.0 DC power supply or AC adapter Pulse generator or X-ray unit There is not the BNC connector, the power switch and the power input connector in the C9266-04. PC KACCC0514EA Example of sample software (C9266DCamAPL) on PC screen OS: Windows2000/XP Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed in the specification sheets or supplied as samples may have a suffix “(X)” which means tentative specifications or a suffix “(Z)” which means developmental specifications. ©2010 Hamamatsu Photonics K.K. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KACC1174E01 Jan. 2010 DN 5