H5773P-06

Metal Package PMT Photosensor Modules H5773/H5783/H6779/H6780 Series The H5773/H5783/H6779/H6780 series are photosensor modules housing a metal package PMT and high-voltage power supply circuit. The metal package PMTs have a metallic package with the same diameter as a TO-8 package used for semiconductor photodetectors, and deliver high gain, wide dynamic range and highspeed response while maintaining small dimensions identical to those of photodiodes. The internal high-voltage power supply circuit is also compact, making the module easy to use. Considering the mounting methods, a cable output type and a pin output type are provided, and a total of 7 types are available according to the wavelength range to be measured. A P-type is also available with selected gain and dark count ideal for photon counting under extremely low light conditions. Product Variations Suffix Type No. None -01 -02 yes yes yes yes yes yes yes yes no no yes yes yes yes no no yes yes -03 yes yes no no yes yes -04 -06 yes yes no no yes yes yes yes no no yes yes -20 Output Type yes yes no no yes yes On-board Cable output On-board Cable output On-board Cable output Features Low power consumption For photon counting Low power consumption Low ripple noise Fast settling time H5773 H5783 H5773P H5783P H6779 H6780 Suffix None -01 -02 -03 -04 -06 -20 Spectral Response 300 nm to 650 nm 300 nm to 850 nm 300 nm to 880 nm 185 nm to 650 nm 185 nm to 850 nm 185 nm to 650 nm 300 nm to 900 nm Specifications Parameter Suffix Input Voltage Max. Input Voltage Max. Input Current Max. Output Signal Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength Min. Luminous Sensitivity Typ. Blue Sensitivity Index (CS 5-58) Red/White Ratio Radiant Sensitivity *1 Luminous Min. Sensitivity Typ. Radiant Sensitivity *1 *2 Typ. Dark Current *2 *3 Max. Min. 2 Gain * Typ. Radiant Sensitivity *1 *2 Typ. Dark Count *2 *3 Max. Rise Time *2 Cathode Standard Type Anode P Type Ripple Noise *2 *4 (peak to peak) Max. Settling Time *5 Operating Ambient Temperature Storage Temperature Weight None The suffix -06 type (synthetic silica window) has higher sensitivity than the -03 type below 300 nm in wavelength range. H5773 / H5783 / H6779 / H6780 Series -01, -04 -20 -02 -03, -06 +11.5 to +15.5 +18 H5773 / H5783 Series: 9 H6779 / H6780 Series: 30 100 +1.0 (Input impedance 100 kΩ) +0.25 to +0.9 8 1: 104 420 500 630 420 400 40 350 200 40 80 70 250 500 70 150 8 — — 8 — — 0.25 0.45 — 0.2 62 78 58 62 60 10 35 25 10 15 50 125 250 50 75 4.3 × 104 2.9 × 104 3.9 × 104 4.3 × 104 3.0 × 104 0.2 0.2 0.4 2 2 2 2 4 20 20 7.5 × 105 — — 1 × 106 — 6.2 × 104 — 80 — 400 0.78 H5773 Series H5783 Series H6779 Series H6780 Series 1.2 0.6 2 0.2 +5 to +50 +5 to +45 -20 to +50 60 80 60 80 Unit — V V mA µA V V mm — nm µA/lm — — mA/W A/lm A/W nA — A/W s-1 ns mV s °C °C g 16 *1: Measured at the peak sensitivity wavelength *2: Control voltage = +0.8 V *3: After 30 minute storage in darkness *4: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 MΩ, Load capacitance = 22 pF *5: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. Current Output Type Photosensor Modules Characteristics (Cathode radiant sensitivity, Gain) TPMOB0132EA TPMOB0133EB 100 -06 Type 100 -02 Type 108 TPMOB0134EB CATHODE RADIANT SENSITIVITY (mA/W) CATHODE RADIANT SENSITIVITY (mA/W) 107 P Type -01 Type 10 -20 Type 106 None Type 10 GAIN 105 None, -03, -06 Type 104 -03 Type -04 Type 1 1 -01, -02, -04, -20 Type 103 0.1 100 200 300 400 500 600 700 800 0.1 100 200 300 400 500 600 700 800 900 1000 102 0.25 0.3 0.4 0.5 0.7 1.0 1.2 1.5 2.0 WAVELENGTH (nm) WAVELENGTH (nm) CONTROL VOLTAGE (V) Sensitivity Adjustment Method Voltage Programming POWER SUPPLY +15 V GND SIGNAL OUTPUT Resistance Programming POWER SUPPLY SIGNAL OUTPUT PHOTOSENSOR MODULE LOW VOLTAGE INPUT GND Vref OUTPUT Vcontrol INPUT PHOTOSENSOR MODULE LOW VOLTAGE INPUT GND Vref OUTPUT Vcontrol INPUT +15 V GND 2 kΩ *2 *1: When using a potentiometer to adjust sensitivity, monitor the control voltage so it does not exceed +1.0 V. *2: H6779/H6780 series has this 2 kΩ resistor. No external resistor is needed. +0.25 V to +0.9 V GND • Adjust the control voltage to adjust the sensitivity. • Electrically insulate the reference voltage output. MONITOR POTENTIOMETER (*1) (10 kΩ) TPMOC0131EC Dimensional Outlines (Unit: mm) H5773/H6779 Series 50.0 ± 0.5 14.0 ± 0.2 25.0 ± 0.5 12.5 12.7 5.08 17.78 5.08 Option (Optical Fiber Adapter) (Unit: mm) E5776 (FC Type) 22.0 ± 0.5 14.0 ± 0.2 8.5 3.5 ± 0.2 14.0 ± 0.2 15.24 1 8 76 23 54 11 ("-06" TYPE: 0±0.2) 4-M2 DEPTH: 4 EFFECTIVE AREA 8 TOP VIEW 10 BOTTOM VIEW 1NO CONNECTION 2Vref OUTPUT (+1.2 V) 3Vcontrol INPUT (+0.25 V to +0.9 V) 4LOW VOLTAGE INPUT (+15 V) 5GND 6SIGNAL GND 7SIGNAL OUTPUT 8NO CONNECTION 4-M2 TOP VIEW FC-R SIDE VIEW TACCA0055EA 12 ± 1 18.0 ± 0.5 1.5±0.2 WINDOW 1 SIDE VIEW E5776-51 (SMA Type) 22.0 ± 0.5 TPMOA0010EC 15.24 14.0 ± 0.2 10.7 5.0 H5783/H6780 Series 22.0 ± 0.5 14.0 ± 0.2 50.0 ± 0.5 1.5 ± 0.2 ("-06" TYPE: 0 ± 0.2) WINDOW 10 LOW VOLTAGE INPUT : AWG26 (RED, +15 V) GND : AWG26 (BLACK) Vref OUTPUT : AWG26 (BLUE, +1.2 V) Vcontrol INPUT : AWG26 (WHITE, +0.25 V to +0.9 V) SIGNAL OUTPUT : RG-174/U 4-M2 FRONT VIEW SMA SIDE VIEW TACCA0239EA 450 ± 20 3.0 EFFECTIVE AREA 8 4-M2 DEPTH: 4 TOP VIEW SIDE VIEW TPMOA0011EC 17