H7826P

Photosensor Modules H7826 Series The H7826 series photosensor modules consist of a 19-mm (3/4") diameter head-on photomultiplier tube and a high-voltage power supply circuit. The length of the photomultiplier tube used here is short compared to other photomultiplier tubes of the same diameter, making it compact even though it has a large light input diameter of 15 mm. The H7826 also has excellent resistance to vibration and shock compared to other photomultiplier tubes, making it ideal for use in portable equipment. Product Variations Type No. H7826 H7826P H7826-01 H7826P-01 Spectral Response 300 nm to 650 nm 300 nm to 850 nm Features For general applications in visible range For photon counting For general applications in visible to near IR range For photon counting Specifications Parameter H7826 Input Voltage Max. Input Voltage Max. Input Current Max. Output Signal Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength Min. Luminous Sensitivity Typ. Blue Sensitivity Index (CS 5-58) Typ. Red/White Ratio Typ. Radiant Sensitivity *1 Typ. Min. Luminous Sensitivity *2 Typ. Radiant Sensitivity *1 *2 Typ. Typ. Dark Current *2 *3 Max. Gain *2 Min. Typ. Dark Count *3 *4 Max. Typ. Rise Time *2 Ripple Noise *2 *5 (peak to peak) Max. Max. Settling Time *6 Operating Ambient Temperature *7 Storage Temperature *7 Weight Cathode Anode 420 60 90 10.5 — 85 10 50 4.7 × 104 3 20 — — — H7826-01 H7826P +11.5 to +15.5 +18 40 100 +1.2 (Input impedance 100 kΩ) +0.5 to +1.1 15 1: 103 380 420 80 60 120 90 — 10.5 0.2 — 49 85 30 1.3 × 104 — — — 3 20 1.8 × 106 200 500 1.5 0.5 0.2 +5 to +45 -20 to +50 70 H7826P-01 380 80 120 — 0.2 49 Unit V V mA µA V V mm — nm µA/lm — — mA/W A/lm A/W nA 1 × 106 2000 3500 — s-1 ns mV s °C °C g *1: Measured at the peak sensitivity wavelength *2: Control voltage = +1.0 V *3: After 30 minutes storage in darkness *4: Control voltage: Plateau voltage *5: Cable RG-174/U, Cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF *6: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. *7: No condensation HAMAMATSU PHOTONICS K.K. Characteristics (Cathode radiant sensitivity, Gain) TPMOB0143EA JAN.2008 100 108 TPMOB0144EA CATHODE RADIANT SENSITIVITY (mA/W) H7826-01 107 10 106 H7826 GAIN H7826 105 1 104 H7826-01 103 0.1 200 300 400 500 600 700 800 900 102 0.25 0.3 0.4 0.5 0.7 1.0 1.2 1.5 WAVELENGTH (nm) CONTROL VOLTAGE (V) Sensitivity Adjustment Method VOLTAGE PROGRAMMING PHOTOSENSOR MODULE SIGNAL OUTPUT LOW VOLTAGE INPUT(RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) POWER SUPPLY +15 V GND RESISTANCE PROGRAMMING PHOTOSENSOR MODULE SIGNAL OUTPUT LOW VOLTAGE INPUT(RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) MONITOR POTENTIOMETER (10 kΩ) When using a potentiometer, adjust sensitivity while monitoring the control voltage. TPMOC0149EC POWER SUPPLY +15 V GND CW • Electrically insulate the reference voltage output. • Adjust the control voltage to adjust the sensitivity. +0.5 V to +1.1 V GND Dimensional Outlines (Unit: mm) 26.0 +0.5 -0 13.0 ± 0.5 EFFECTIVE AREA 15 MIN. 0 +0.1 -0.3 56.0 +0.5 -0 SIGNAL OUTPUT BNC-R 19.0 ± 0.5 18.0 ± 0.5 POWER INPUT HIROSE HR10A-7R-6P 1: GND 2: LOW VOLTAGE INPUT (+15 V) 3: Vcont INPUT (+0.5 V to +1.1 V) 4: Vref OUTPUT (+1.2 V) 5: NC 6: NC 50.0 +1.0 -0 14.0 ± 0.5 18 THREADED HOLE for OPTION (4-M2 DEPTH: 5) 10.0 ± 0.5 FRONT VIEW 16.0 ± 0.5 25.0 ± 0.5 18.6 ± 0.7 MOUNTING THREADED HOLE (2-M3 DEPTH: 5) REAR VIEW SIDE VIEW Power cable with connector (HIROSE HR10A-7P-6S) is supplied with the H7826 series BLACK : GND RED : LOW VOLTAGE INPUT (+15 V) WHITE : Vcont INPUT (+0.5 V to +1.1 V) BLUE : Vref OUTPUT (+1.2 V) GREEN : NC 700 ± 20 TPMOA0005ED