H9170-75

NA R NIR-PMT MODULE (Thermoelectrically cooled) ELI MI PR Y H9170-45, -75 Wavelength Range: 950 nm to 1400 nm / 950 nm to 1700 nm, TE cooled, High Speed, Suitable for Photon counting * Rotary Vacuum Pump is not shown (included) OVER VIEW Hamamatsu has developed a highly sensitive semitransparent NIR photocathode by the novel photocathode technology. We have adopted this technology to a compact photomultiplier tube (PMT) and have developed a PMT module with the air cooled TE cooler and high voltage power supply with protection circuit. No liquid nitrogen or cooling water is necessary. The cooling unit is equipped with a condensor lens that allows large input area for easy optical coupling. Adaptors for optical fiber or monochromator are available as an option. FEATURES GHigh Sensitivity (Capable of Photon Counting) GFast Time Response Rise Time: 900 ps, TTS: 300 ps GCompact GSimple Operation by Air Cooled TE Cooler No Liquid Nitrogen, No Cooling Water in Necessary GOperable in 20 min after Swiched ON GLarge Detection Area 19 mm for Collimated Light GHV Power Supply with Interlock Function GMechanical Shutter GOptional Adaptors are Available. For Optical Fiber (FC type) For Monochromator APPLICATIONS GPhotoluminescence GSinglet Oxygen Measurement GRaman Spectroscopy GCathodoluminescence GFluorescence, Fluorescence Life Time GLIDAR SPECIFICATIONS GENERAL Parameter Spectral Response Photocathode Material Detection Area for Collimated Light Effective Area of PMT PMT Operating Temperature PMT Supply Voltage Storage Ambient Temperature Operating Ambient Temperature H9170-45 950 to 1400 InP/InGaAsP 19 1.6 -60 -500 to -900 -20 to +50 +7 to +30 H9170-75 950 to 1700 InP/InGaAs Unit nm — mm mm °C V °C °C MAXIMUM RATING Parameter PMT Supply Voltage Average PMT Anode Current H9170-45 -900 1 H9170-75 Unit V µA CHARACTERISTICS (at -800 V, -60 °C) Parameter Cathode Sensitivity 1 Anode sensitivity 1 Gain Anode Dark Current 2 Anode Dark Count 2 Time Response Quantum Efficiency Radiant Radiant Min. 0.48 5 1000 2 × 105 — — — — — H9170-45 Typ. — — — 1 × 106 4 2 × 104 0.9 1.7 0.3 Max. — — — — 10 — — — — Min. 0.29 3.5 700 2 × 105 — — — — — H9170-75 Typ. — — — 1 × 106 40 2 × 105 0.9 1.7 0.3 Max. — — — — 100 — — — — Unit % mA/W A/W — nA s-1 ns ns ns Anode Pulse Rise Time Anode Pulse Fall Time Transit Time Spread 1 At 1300 nm (H9170-45), at 1500 nm (H9170-75) 2 At 30 minutes after high voltage is applied with shutter closed, and 1 × 106 gain. MODULE, CONTROLLER Parameter Cooling Method Condenser Lens Material Diameter of the Condenser Lens F Number of the Condenser Lens Cooling Time to -60 °C PMT Temperature Protection Function Input Voltage (AC) Module Dimensions (W × H × D) 3 Controller Module Weight Controller 3 Excluding projections. Value / Description Thermoelectric / Air Cooled BK7 20 1.25 20 High Voltage Interlock for Inappropreate Temperature 90 to 264 (50 Hz / 60 Hz) 210 × 193 × 200 100 × 193 × 310 Approx. 8 Approx. 3 Unit — — mm — min — V mm kg ROTARY VACUUM PUMP Parameter Type Input Voltage (AC) 4 Pumping Speed Dimensions (W × H × D) Weight Value / Description Oil-Sealed Rotary Vacuum Pump 90 to 126 or 180 to 252 (50 Hz / 60 Hz), Single Phase 50 (50 Hz), 60 (60 Hz) 150 × 251 × 427 Approx. 16 Unit — V l/min mm kg 4 The voltage is set at the factory. If change is necessary, please consult with your local Hamamatsu office. CHARACTERISTICS GSpectral Response 102 TPMOB0161EA -60 °C GTypical Gain 107 TPMOB0165EA -60 °C CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) CATHODE RADIANT SENSITIVITY H9170-75 101 106 100 GAIN QUANTUM EFFICIENCY 10-1 H9170-45 10-2 10-3 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 105 104 103 500 600 700 800 900 WAVELENGTH (nm) PMT SUPPLY VOLTAGE (V) GTiming Properties Waveform TPMOB0163EA Transit Time Spread (T.T.S.) 10 000 TPMOB0164EA -60 °C FWHM 296 ps FWTM 550 ps OUTPUT VOLTAGE (20 mV/Div.) NUMBER OF COUNTS 1000 FWHM 100 FWTM SUPPLY VOLTAGE: -800 V RISE TIME : 746 ps FALL TIME : 1.58 ns PULSE WIDTH : 1.63 ns WAVELENGTH : 1300 nm TEMPERATURE : -60 °C LOAD RESISTOR : 50 Ω 10 1 0 200 400 600 800 1000 1200 TIME (2 ns/Div.) CHANNEL NUMBER GTemperature / Dark Current vs. Cooling Time (H9170-45) 30 TPMOB0162EB SYSTEM CONFIGURATION (CONNECTION DIAGRAM) NIR PMT MODULE NIR PMT MODULE 70 INDICATED TEMPERATURE (°C) DARK CURRENT 0 -15 INDICATED TEMPERATURE -30 -45 -60 -75 30 20 10 0 25 50 40 ANODE DARK CURRENT (nA) 15 60 NIR PMT MODULE CONTROLLER RESISTOR BOX WITH BNC CONNECTORS °C/V (100 kΩ) TEMPERATURE/VOLTAGE OPERATE ERROR TEMPERATURE HIGH VOLTAGE CABLE (2.5 m) VOLTAGE OUTPUT OUTPUT ADJ. POWER CONTROL CABLE (2.5 m) NIR PMT MODULE CONTROLLER METAL FLEXIBLE HOSE (1.5 m) 0 5 10 15 20 COOLING TIME (min) ROTARY VACUUM PUMP TPMOC0172EB DIMENSIONAL OUTLINES (Unit: mm) GNIR-PMT Module 210 SHUTTER M29.5 P0.5 NIR PMT MODULE 18 200 CONDENSER LENS 193 SHUTTER 19 NW16 VACUUM VALVE 50.8 (12) (12) 34 38 20 84 [BACK VIEW] [FRONT VIEW] [SIDE VIEW] PHOTOCATHODE 4-M6 170 150 150 170 [BOTTOM VIEW] TPMOA0025EA GNIR-PMT Module Controller 100 310 GRotary Vacuum Pump OIL MIST TRAP INLET NW16 TEMPERATURE/VOLTAGE °C/V OPERATE ERROR 193 TEMPERATURE VOLTAGE OUTPUT OUTPUT DC-500V—— to 950V—— CONTROLLER OUT OUTPUT ADJ. ~AC INPUT POWER 100V-240V:125VA 50Hz/60Hz MAX NIR PMT MODULE CONTROLLER MODEL NO. C9173 SERIAL NO. AC1001575 HAMAMATSU PHOTONICS K.K. MADE IN JAPAN MIN (12) 73 [FRONT VIEW] 268 18 110 150 [SIDE VIEW] [BACK VIEW] TPMOA0026EA 251 81 17 206 427 17 * The drawing of the AC plug shows Japanese / USA types. European and UK types are also available. TPMOA0027EB OPTIONS (sold separately) Adaptors to match optical fiber connectors or monochromators are available. GOptical Fiber Adaptor The adaptor efficiently collects light from the optical fiber with FC connector. GMonochromator Adaptor The adaptor collects light from a monochromator efficiently. Please inform us of the type of the monochromator. GResistor Box with BNC Connectors A 50 Ω resistor box with BNC connectors is available. Use the 100 kΩ resistor box (supplied with H9170) for use with a lock-in amplifier. *Please contact your local Hamamatsu office for any assistance. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2003 Hamamatsu Photonics K.K. WEB SITE http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it TPMO1026E03 MAY 2003 IP Printed in Japan (1000)