0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
L7810_09

L7810_09

  • 厂商:

    HAMAMATSU

  • 封装:

  • 描述:

    L7810_09 - Light level control of light source Sensitivity control of optical sensor - Hamamatsu Cor...

  • 数据手册
  • 价格&库存
L7810_09 数据手册
SOURCE L7810, L7810-02 CALIBRATED LAMP LIGHT LIGHT SOURCE SERIES L7810, L7810-02 (Xenon Lamp) L7820, L7820-02 (Deuterium Lamp) Easy to reproduce highly stable light!! Left: Lamp Housing Right: Power Supply TLSOF0151 L7820, L7820-02 Left: Lamp Housing Right: Power Supply TLSOF0159 These light sources deliver the extremely high levels of "stability" and "repeatability" essential to calibrated light sources. These are available as an optimal set including a lamp, lamp housing and power supply, so that anyone can easily reproduce a highly stable light output. The L7810-02 xenon lamp light source is calibrated over a wide spectral range from 200 nm to 800 nm, while the L7820-02 deuterium lamp light source is calibrated in the UV range from 200 nm to 400 nm. Since we are certified as an ASNITE-Calibration laboratory, we are capable of calibrating spectral irradiance over a wide range from 200 nm to 800 nm (L7810-02). The spectral range at wavelengths shorter than 250 nm is calibrated based on the ASNITE calibration system (Accreditation System of National Institute of Technology and Evaluation), while the spectral range at wavelengths longer than 250 nm is calibrated based on the JCSS (Japan Calibration Service System). As of August 2009, Hamamatsu Photonics is the only company certified as an ASNITE-Calibration laboratory in the "Light" field. Manufactured upon receiving your order. APPLICATIONS GLight level control of light source GSensitivity control of optical sensor GLight intensity measurement and studies of photoreactions (Light resistance, light curing, etc.) GQuality control of photometric equipment (Medical analysis equipment, semiconductor inspection systems, imaging devices, etc) SPECIFICATIONS Type No. Lamp Input Wattage Spectral Distribution Calibrated ASNITE Calibration Range 1 JCSS Type of Calibration Calibration Unit Output Window Material (Lamp Housing) Output Window Diameter Optical Axis Height Warm-up Time Timer Input Voltage (AC) Power Consumption Cooling (Lamp Housing, Power Supply) Ambient Operating Temperature Operating Range Temperature During Calibration Humidity Dimensions Lamp Housing (excluding projecting parts) Power Supply (W × H × D) Carrying Case 2 Lamp Housing Weight Power Supply Total Weight 3 Recalibration Interval 4 Guaranteed Lamp Service Life 5 L7810-02 L7820 L7820-02 Deuterium lamp Xenon lamp 30 W 150 W 185 nm to 400 nm 185 nm to 2000 nm — — 200 nm to 245 nm (5 nm intervals) 200 nm to 245 nm (5 nm intervals) 250 nm to 400 nm (10 nm intervals) 250 nm to 800 nm (10 nm intervals) Spectral irradiance µW·cm-2·nm-1 Synthetic quartz 25 mm 28 mm 140 mm (150 mm including plastic feet) 10 minutes or more Hour display (lamp housing) Hour display (power supply) 100 V to 240 V, 50 Hz / 60 Hz 90 VA 350 VA Forced air cooling 0 °C to +40 °C +23 °C to +27 °C 20 % to 70 % (no condensation) 100 mm × 280 mm × 100 mm 117 mm × 90 mm × 200 mm 144 mm × 90 mm × 282 mm 480 mm × 380 mm × 205 mm Approx. 2.2 kg Approx. 2.9 kg Approx. 2.2 kg Approx. 3.2 kg Approx. 9.5 kg Approx. 11 kg 100 hours in operation 500 hours L7810 NOTE: 1Spectral irradiance is measured at a point 50 cm away from the reference plane of the lamp housing. 2Carrying case specially designed to contain one set of calibrated lamp light source and accessories. 3Total weight including a set of calibration lamp light source and carrying case. 4This is a general guide for recalibration to maintain calibration reliability. Please contact our sales office for recalibration fee. 5This is the total amount of time that the lamp can be recalibrated to serve as a calibrated light source. COMPARISON OF SPECTRAL IRRADIANCE (Reference Data) 100 TLSOB0063EB LIGHT INTENSITY DRIFT (Typ.) TLSOB0065EB 50 cm away from the light source 110 100 SPECTRAL IRRADIANCE (µW . cm-2. nm-1) RELATIVE INTENSITY (%) 10 HIGH POWER CALIBRATED XENON LIGHT SOURCE L7810 (250 nm to 800 nm) L7810-02 (200 nm to 800 nm) 90 80 70 60 50 40 30 20 10 1 CONVENTIONAL HALOGEN LAMP 0.1 HIGH STABILITY CALIBRATED DEUTERIUM LIGHT SOURCE L7820 (250 nm to 400 nm) L7820-02 (200 nm to 400 nm) WIDE SPECTRAL RANGE 650 700 750 800 0.01 0.001 200 250 300 350 400 450 500 550 600 0 10 20 30 40 50 60 70 80 90 100 110 WAVELENGTH (nm) ASNITE calibration JCSS OPERATING TIME (h) This is the logo mark for the Accreditation System of National Institute of Technology and Evaluation (ASNITE), an independent administrative agency in Japan. NITE independently implements calibration standards based on international standards. In spectral regions not covered by the range specified by JCSS, NITE carries out accreditation to make calibration using international and foreign national standards. The Product Management Dept. of Hamamatsu Photonics K. K. was accredited as an ASNITE calibration company in the "Light" field on May 7, 2004 and is entitled to issue calibration certificates bearing the ASNITE logo mark (ASNITE accreditation symbol). This is the logo mark for the traceability system approved by the Japan Calibration Service System (JCSS) based on the Measurement Law. The Product Management Dept. of Hamamatsu Photonics K. K. was accredited as a calibration company in the "Light" field on May 21, 1999, and then became a registered company on August 4, 2009 according to the legal revisions. And is entitled to issue calibration certificates bearing the JCSS logo mark (JCSS accreditation symbol). Those calibration certificates assure the traceability to National Measurement Standards and can be used, for example, as a traceability certificate for ISO9000 series. DIMENSIONAL OUTLINES (Unit: mm) L7810, L7810-02 (Xenon Lamp) LAMP HOUSING COOLING FAN FRONT VIEW SIDE VIEW 60 140 OUTPUT WINDOW 28 280 REFERRENCE SURFACE OF CALIBRATION CONNECTOR * 100 BOTTOM VIEW M4 10 50 5 100 4-M4 Plastic feet attached as standard features. These can be removed to use their holes for installation of lamp housing. 39 78 TLSOA0066EC 78 POWER SUPPLY FRONT VIEW TIME COUNTER LAMP ON 39 SIDE VIEW 77 5 REAR VIEW CONNECTOR * CALIBRATED XENON LIGHT SOURCE 90 POWER OUTPUT TIME COUNTER RESET OUTPUT CURRENT POWER INTER LOCK OVER HEAT (A dc) 100-240V~350VA 50/60Hz 144 282 COOLING FAN * For cable to connect lamp housing with power supply, length: 2 m TLSOA0090EB DIMENSIONAL OUTLINES (Unit: mm) L7820, L7820-02 (Deuterium Lamp) LAMP HOUSING COOLING FAN FRONT VIEW SIDE VIEW 140 OUTPUT WINDOW 25 280 REFERRENCE SURFACE OF CALIBRATION 60 5 CONNECTOR * 100 BOTTOM VIEW 10 50 100 4-M4 Plastic feet attached as standard features. These can be removed to use their holes for installation of lamp housing. 39 78 TLSOA0072ED 78 POWER SUPPLY FRONT VIEW CONNECTOR * CALIBRATED DEUTERIUM LIGHT SOURCE 39 SIDE VIEW REAR VIEW POWER POWER OUTPUT LAMP 90 OUTPUT 117 200 COOLING FAN TLSOA0091EB * For cable to connect lamp housing with power supply, length: 1.8 m WARRANTY This device is guaranteed for one year after delivery date from us. The warranty extends only to replacement of the products. The warranty dose not cover damage due to misuse of natural calamity. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2009 Hamamatsu Photonics K.K. WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TLSO1054E04 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it OCT. 2009 IP
L7810_09 价格&库存

很抱歉,暂时无法提供与“L7810_09”相匹配的价格&库存,您可以联系我们找货

免费人工找货