R5900U-M4

MULTIANODE PHOTOMULTIPLIER TUBE R5900U-M4/R7600U-M4 2 × 2 Multianode, High Speed Response, Low Cross-talk, 30 mm Square Bialkali and Multialkali Photocathode, 10-stage, Head-on Type FEATURES G2 × 2 Multianode, Anode Size: 9 mm × 9 mm / Anode GEffective Area: 18 mm × 18 mm GHigh Speed Response GLow Cross-talk: 2 % Typ. GHigh Cathode Sensitivity Luminous 200 µA/lm Typ. (-01 Type) Luminous 500 µA/lm Typ. (-20 Type) APPLICATIONS GHigh Energy Physics GScintillation Counting GFlow Cytometer (-01, -20 Type) GDNA Sequencer (-01, -20 Type) Figure 1: Typical Spectral Response 100 TPMHB0744EB 100 TPMHB0745EB CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 10 CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) -00 TYPE -03 TYPE 10 -04 TYPE -01 TYPE -20 TYPE 1 1 0.1 0.1 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 800 900 1000 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 0.01 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) WAVELENGTH (nm) Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. MULTIANODE PHOTOMULTIPLIER TUBE R5900U-M4/R7600U-M4 Spectral Response Type No. Range (nm) 300 to 650 300 to 880 185 to 650 185 to 880 300 to 920 A B C Maximum Ratings D Average Anode Output Current in Total Supply Dynode Voltage PhotoBetween Peak Window Wavelength cathode Material Structure Anode and Material / Stages Cathode R7600U-00-M4 R5900U-01-M4 R7600U-03-M4 R5900U-04-M4 R5900U-20-M4 (nm) 420 420 420 420 530 BA MA BA MA MA K K U U K MC/10 MC/10 MC/10 MC/10 MC/10 (V) 900 900 900 900 900 (mA) 0.1 0.1 0.1 0.1 0.1 Cathode Characteristics Luminous Red/ Blue Sensitivity White Radiant Index Ratio (CS 5-58) (R-68) Typ. Typ. Typ. Min. Typ. (µA/lm) (µA/lm) (mA/W) 80 — 9.5 80 60 65 0.25 — 200 150 80 — 9.5 80 60 65 0.25 — 200 150 78 0.4 — 500 350 NOTE: A BA: Bialkali, MA: Multialkali B K: Borosilicate glass, U: UV glass C MC: Metal channel D The maximum operating temperature range is -30 °C to +50 °C. Figure 2: Typical Gain 108 TPMHB0746EA Figure 3: Time Response (Example) TPMHB0313EA 107 106 -00/-03 TYPE GAIN 105 -01/-04/-20 TYPE 104 SUPPLY VOLTAGE: 800 V RISE TIME: 1176 ps FALL TIME: 1453 ps WIDTH: 2077 ps RL: 50 Ω 103 20 (mV/div.) 2 (ns/div.) 102 400 600 800 1000 SUPPLY VOLTAGE (V) Figure 4: TTS Characteristic (Example) TPMHB0314EA Figure 5: Pulse Linearity (Example) 5 TPMHB0743EA 104 TYPE: R7600U-00-M4 SUPPLY VOLTAGE: 800 V FWHM: 310 ps FWTM: 631 ps 0 RELATIVE COUNTS 102 DEVIATION (%) 103 -5 -10 101 -15 PULSE WIDTH: 50 ns REPETITION: 1 kHz SUPPLY VOLTAGE: 800 V DIVIDER RATIO 1.5: 1.5: 1.5: 1 ... 1: 1: 1 1 10 100 100 -20 -25 TIME (0.5 ns/div) OUTPUT CURRENT (mA) Anode to Cathode Supply Voltage (V) 800 800 800 800 800 Anode Characteristics Dark Current per Channel Gain (After 30 min) Typ. Max. Min. Typ. Typ. (A/lm) (A/lm) (nA) (nA) 140 1.8 × 106 5 25 0.5 200 1.0 × 106 12.5 50 2.5 140 1.8 × 106 5 25 0.5 200 1.0 × 106 12.5 50 2.5 500 1.0 × 106 12.5 100 2.5 Luminous K Pulse Linearity Uniformity per Channel Between Time Response CrossEach Anode Rise Transit talk 2% 5% Time Time TTS Deviation Deviation Typ. Typ. Typ. Typ. Max. (%) (ns) (ns) (ns) (mA) (mA) 1: 1.5 1: 2 1.2 9.5 0.32 10 30 1: 1.5 1: 3 2 1: 2 1: 2 Type No. R7600U-00-M4 R5900U-01-M4 R7600U-03-M4 R5900U-04-M4 R5900U-20-M4 VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Dy10 1 1 1 1.5 1.5 1.5 1 1 1 1 1 Supply Voltage: 800 V, K: Cathode, Dy: Dynode, P: Anode Electrodes Ratio P Figure 6: Anode Uniformity (Example) Figure 7: Anode Cross-talk (Example) 82 97 95 100 0.1 1.3 0.9 100 Supply Voltage: -800 V Light Source: Lamp (uniform DC light) Full Illumination Supply Voltage: -800 V Light Source: Lamp (uniform DC light) Spot Illumination: 9 mm × 9 mm 30.0 ± 0.5 25.7 ± 0.5 18 MIN. 0.6 ± 0.4 22.0 ± 0.5 12.0 ± 0.5 2.54 PITCH CUT (IC) P1 CUT (IC) CUT (IC) CUT (IC) P4 CUT (IC) 29- 0.45 CUT (K) Dy10 Dy9 Dy8 Dy7 Dy6 Dy5 CUT (Dy10) CUT (K) : Photocathode K Dy : Dynode : Anode P CUT : Short Pin IC : Internal Connection (Don't Use) Basing Diagram TPMHA0297EI 0.20 4 MAX. PHOTOCATHODE 123456789 32 10 11 31 30 12 GUIDE 29 13 CORNER 28 14 15 27 16 26 25 24 23 22 21 20 19 18 17 K 4.4 ± 0.7 CUT (Dy10) CUT (IC) Dy1 Dy2 Dy3 Dy4 CUT (Dy10) CUT (K) CUT (IC) P2 CUT (IC) CUT (IC) CUT (IC) P3 CUT (IC) Figure 8: Dimensional Outline and Basing Diagram (Unit: mm) 0.20 INSULATION COVER TOP VIEW SIDE VIEW BOTTOM VIEW MULTIANODE PHOTOMULTIPLIER TUBE R5900U-M4/R7600U-M4 [ACCESSORIES] (Unit: mm) SOLD SEPARATELY G Socket Assembly E678-32B 22.86 20.32 2.54 4.45 2.92 22.86 20.32 12.7 0.51 12.7 MATERIAL: GLASS EPOXY 1.57 TACCA0094ED G D Type Socket Assembly E7083 PIN No.1 30.0 ± 0.5 30.0 ± 0.5 27 15 11 31 P4 P3 SIGNAL OUTPUTS P2 :COAXIAL CABLE (GRAY) P1 P4 P3 P2 P1 POM HOUSING 15.0 ± 0.5 DY10 DY9 DY8 450 DY7 DY6 DY5 DY4 P2 P3 -HV RG-174/U POTTING COMPOUND P4 DY3 DY2 K DY1 24 R14 R13 23 R11 R10 R9 R8 C3 C2 C1 R12 22 21 R7 20 R6 19 R1 to R3 R4 to R11 R12 to R14 R15 C1 to C3 : 330 kΩ : 220 kΩ : 51 Ω : 1 MΩ : 0.01 µF R5 7 R4 6 R3 5 ORIENTATION BY MARKING P1 R2 4 R15 1 R1 -H.V P1toP4:SIGNAL OUTPUTS COAXIAL CABLE(GRAY) : RG-174U (RED) * For a stable operation, all of anodes should be connected to ground potential through load resistors such as 100 k ohm or so, even if they are not used. TACCA0266EA WARNING ~ High Voltage ~ The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments. * PATENT: USA: 5410211 and other(9), GBR: 551767 and other(9), DEU: 69209809 and other(9), FRA: 551767 and other(9), JPN: 3078905 and other(9) WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TPMH1294E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it SEPT. 2007 IP