R7400U

METAL PACKAGE PHOTOMULTIPLIER TUBE R7400U SERIES Compact size (16 mm diameter, 12 mm seated length), Fast Time response (rise time 0.78 ns) The R7400U series is a subminiature photomultiplier tube with a 16 mm diameter and 12 mm seated length. A precision engineered 8-stage electron multiplier (composed of metal channel dynodes) is incorporated in the TO-8 package to produce a noise free gain of 700,000 times (R7400U). The R7400U series also features excellent response time with a rise time of 0.78 ns. Various types of the R7400U series are available with different spectral response and gain ranges, including those selected specifically for photon counting applications. Hamamatsu also provides a hemispherical lens input option to the series (R7401 and R7402), effectively doubling the active area. Left: R7400U Right: R7401/R7402 FEATURES World's smallest photomultiplier tubes assembled in a TO-8 metal package (1/7th of the Hamamatsu R647). The necessary components are built into a TO-8 package while retaining full photomultiplier tube performance to create a new generation of photosensors. Photon counting type: R7400P. The R7400P is specially selected on account of low noise and high gain for use in photon counting applications. Hemispherical lens window types: R7401 (bialkali), R7402 (multialkali). The hemispherical lens window doubles the effective input area to 12 mm in diameter. SERIES Solar Blind UV to Visible Range R7400U/R7400U-03/R7400U-06 R7400P R7401 (Visible Range) UV to Near IR Range R7400U-01/R7400U-02/R7400U-04/R7400U-20 — R7402 (Visible to Near IR Range ) Insulation Cover Yes Yes Yes Standard For Photon Counting With Lens R7400U-09 — — GENERAL Parameter Minimum Effective Area Dynode Weight Structure Number of Stage R7400U Series/R7400P R7401/R7402/R7401P R7400U Series/R7400P R7401/R7402/R7401P Description/Value 8 Metal Channel 8 Approx. 5.3 Approx. 6.3 -80 to +50 -30 to +50 g °C Unit mm — Ambient Temperature VOLTAGE DISTRIBUTION RATIO Electrodes Ratio K 1 Dy1 1 Dy2 1 Dy3 1 Dy4 1 Dy5 1 Dy6 1 Dy7 1 Dy8 0.5 P Supply Voltage: 800 V K: Cathode Dy: Dynode P: Anode Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K. METAL PACKAGE PHOTOMULTIPLIER TUBE R7400U SERIES CHARACTERISTICS (at 25 °C) Spectral Response Type No. Remarks Range (nm) R7400U-09 R7400U R7400U-03 R7400U-06 R7400U-01 R7400U-02 UV to Visible Visible Solar Blind Visible 160 to 320 300 to 650 185 to 650 160 to 650 300 to 850 300 to 880 400 500 630 400 420 400 Bialkali Multialkali Multialkali UV glass Borosilicate glass Borosilicate glass 420 Bialkali Peak WaveIength Photocathode Material Cs-Te Window Material Synthetic silica Borosilicate glass UV glass Synthetic silica (nm) 240 Maximum Ratings Cathode Sensitivity Out- Anode to Average Red/White Luminous Radiant Blue(5-58) Ratio line Cathode Anode Typ. Min. Typ. Typ. Typ. No. Voltage Current (V dc) (mA) (µA/lm) (µA/lm) (µA/lm-b) ×10-3 (mA/W) 0.01 — — — — 22(a) 70 8 40 — 62 1000(d) 80 0.1(e) 200 350 80 40 80 150 250 500 150 70 150 8 — — 200 250 450 200 — 60 58 78 R7400U-20 UV to Near IR 300 to 900 R7400U-04 R7401 R7402 With Lens 185 to 850 300 to 650 300 to 850 (at 630 nm) 60 62 60 200 (a): Measured at 254 nm. (b): Measured after a 30-minute storage in darkness. (c): Measured at a gain of 106 (d): Do not apply the maximum supply voltage for more than 30 seconds continuously. Figure 1: Typical Spectral Response (Solar Blind) TPMHB0473EA Figure 2: Typical Spectral Response (Bialkali) TPMHB0474EA 100 100 PHOTOCATHODE RADIANT SENSITIVITY (mA / W) PHOTOCATHODE RADIANT SENSITIVITY (mA / W) R7400U-06 R7400U-09 10 R7400U 10 1 R7400U-03 1 0.1 0.01 100 200 300 400 500 600 0.1 100 200 300 400 500 600 700 800 WAVELENGTH (nm) WAVELENGTH (nm) Figure 3: Typical Spectral Response (Multialkali) TPMHB0475EB Figure 4: Typical Gain Characteristics TPMHB0491EB 100 R7400U-04 R7400U-02 107 R7400P CATHODE RADIANT SENSITIVITY (mA / W) 106 R7400U-01 10 105 R7400U/-03/-06 GAIN R7400U-20 104 1 103 102 R7400U-09 101 200 300 400 500 600 700 800 900 1000 100 200 400 600 800 1000 0.1 100 WAVELENGTH (nm) SUPPLY VOLTAGE (V) Anode to Cathode Supply Voltage Anode Characteristics Anode Sensitivity Luminous Radiant Min. (A/lm) Typ. (A/lm) Typ. (A/W) For Photon Counting (P Type) Time Response Electron RiseTime Transit Time Gain Typ. 5× 104 Anode Dark(b) Current Typ. (nA) Type No. Type No. R7400U-09 R7400U R7400P R7401P Gain Min. Typ. Dark Count (c) (s-1) Typ. 80 Max. 400 Max. (nA) Typ. (V dc) Typ. (ns) (ns) — — 1100(a) 0.025 0.2 0.5 2 7.5 × 105 1 × 106 10 50 4.3 × 104 7 × 105 3.0 × 104 5 × 105 R7400U-03 R7400U-06 800 15 25 35 15 10 15 75 125 250 75 50 75 0.4 2 0.4 0.2 0.4 4 20 4 2 4 2.9 × 104 3.9 × 104 3.0 × 104 0.78 5.4 R7400U-01 R7400U-02 R7400U-20 R7400U-04 R7401 R7402 4.3 × 104 7 × 105 3.0 × 104 5 × 105 (e): The output current averaged over 30 seconds should not exceed 0.1 mA. Figure 5: Typical Gain Characteristics 107 TPMHB0492EC Figure 6: Anode Dark Current (v.s. Supply Voltage) TPMHB0477EB 10 106 R7400U-01/-02/-04/-20 1 105 R7400U-02/-20 Anode Dark Current (nA) R7400U-01/-04 GAIN 104 0.1 R7400U/-03/-06 103 0.01 102 R7400U-09 101 100 200 400 600 800 1000 0.001 100 200 400 600 800 1000 SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) Figure 7: Anode Dark Current (v.s. Temperature) 100 TPMHB0478EA ANODE DARK CURRENT (nA) 10 R7400U-01/04 1 0.1 R7400U/03/06 0.01 Supply Voltage: -800 V 0.01 -20 -10 0 10 20 30 40 50 TEMPERATURE (°C) METAL PACKAGE PHOTOMULTIPLIER TUBE R7400U SERIES Figure 8: Transmittance of Lens 100 90 50 TPMSB0137EB Figure 9: Lens Effect 100 ANODE SENSITIVITY WITH LENS WITHOUT LENS 0 7 0 X-AXIS(mm) 7 0 7 0 Y-AXIS(mm) 50 100 TRANSMITTANCE (%) 80 70 60 50 40 30 20 10 LENS 0 200 300 400 500 600 700 800 900 7 WAVELENGTH (nm) MEASUREMENT CONDITIONS WAVELENGTH : 400 nm SUPPLY VOLTAGE : -800 V A 1 mm diameter spot light (parallel light) is scanned at the center of the photocathode in X and Y directions. TPMHC0153EA Figure 10: Lens Effect R7401 TPMHB0461EB R7402 300 TPMHB0462EB 300 RELATIVE OUTPUT (%) WITH LENS • PARALLEL LIGHT RELATIVE OUTPUT (%) 250 250 WITH LENS • PARALLEL LIGHT 200 WITH LENS • DIFFUSED LIGHT 200 WITH LENS • DIFFUSED LIGHT 150 WITHOUT LENS 100 150 WITHOUT LENS 100 50 PMT: R7400U SUPPLY VOLTAGE: -800 V 50 PMT: R7400U-01 SUPPLY VOLTAGE: -800 V 0 300 400 500 600 700 0 300 400 500 600 700 800 850 900 WAVELENGTH (nm) WAVELENGTH (nm) Parallel light : Parallel Light: from a 40 mm diameter parallel light source insuring uniform intensity over the entire active area of the photomultiplier tube. Diffused light: Diffused light: from a 40 mm diameter parallel light source and a diffuser placed 10cm from the detector. The entire active area of the PMT is exposed. Figure 11: Dimensional Outline and Basing Diagram (Unit: mm) 1R7400U, -01, -02, -03, -04, -20, R7400P INSULATION COVER (Polyoxymethylene) 11.5 ± 0.4 0.5 ± 0.2 4.0 ± 0.3 5±1 5.4 ± 0.3 GUIDE MARK 12- 0.45 5.08 5.08 10.16 Side View Bottom View TPMHA0411EC SHORT PIN 15.9 ± 0.4 WINDOW 9.4 ± 0.4 PHOTOCATHODE 8 MIN. 2R7400U-06,-09 INSULATION COVER (Polyoxymethylene) 12.8 ± 0.5 0.3 ± 0.2 4.0 ± 0.3 5±1 5.4 ± 0.3 GUIDE MARK 12- 0.45 10.16 5.08 SHORT PIN SHORT PIN DY3 DY5 (IC) 2 1 3 DY7 K 12 4 DY1 11 DY2 10 9 DY4 8 DY6 7 DY8 6 5P SHORT PIN (IC) 15.9 ± 0.4 WINDOW 11.0 ± 0.4 PHOTOCATHODE 8MIN. Side View 5.08 10.16 Bottom View TPMHA0410EC 10.16 IC: Internal Connection (Do not use) 3R7401, R7402, R7401P 19 ± 0.5 11.5 ± 0.4 INSULATION COVER (Polyoxymethylene) 4.0 ± 0.3 5±1 5.4 ± 0.3 15.9 ± 0.4 GUIDE MARK 120.45 10.16 TPMHA0415EC SHORT PIN 14±0.3 PHOTOCATHODE 8MIN. 5.08 10.16 Side View Bottom View 5.08 SR7 METAL PACKAGE PHOTOMULTIPLIER TUBE R7400U SERIES ACCESSORIES OPTION Socket E678-12M 6.0 DY5 DY3 DY7 K P DY1 DY2 10.16 12.5 5.08 10.16 0.53 DY8 DY6 5.08 12.5 Top View DY4 1.83 2.8 4.2 3.2 Side View TACCA0059EC D Type Socket Assemblies E5770/E5780 The E5770 and E5780 are compact socket assemblies incorporating a voltage divider circuit comprised of resistors and capacitors. These socket assemblies are designed to provide the output signal directly from the anode of the metal package photomultiplier tube. Grounded Electrode Anode/Cathode Anode Divider Resistance (Total) Maximum Linear Output of Photomultiplier Tube (DC Mode) 13 µA Output Signal Cathode Grounded Anode Grounded Pulse — DC/Pulse DC/Pulse Type No. E5770 E5780 2.8 MΩ * When the E5770 is used with the anode at a positive high voltage, the negative high voltage (-HV) terminal should be grounded and a positive high voltage applied to the ground terminal. In this arrangement, a high voltage differential is generated between the output and an external amplifier, so use a decoupling capacitor that can withstand a high voltage. ** In the E5780, the shield of the signal output cable is connected to the grounded cable, so the E5780 can be used only for negative high voltage operation. Consult our sales office when the E5780 is needed for positive high voltage operation. PC-board Mounting Type E5770 6 SIGNAL OUT Cable Output Type E5780 6 SIGNAL OUT RG-174/U P GUIDE MARK DY8 R8 C2 C1 DY7 R7 DY6 17±0.2 R6 DY5 R5 DY4 R4 15 ± 0.5 DY3 R3 DY2 R2 DY1 -HV or GND K R1 -HV: AWG22 (VIOLET) SIGNAL OUT: RG-174 /U 450 -HV: AWG22 (VIOLET) GND: AWG22 (BLACK) R1 to R8 : 330 kΩ R9 : 160 kΩ C1 to C3 : 0.01 µF /200 V GND: AWG22 C3 (BLACK) P GUIDE MARK DY8 DY7 GND or +HV R9 R8 C3 C2 C1 R9 Top View 17±0.2 R7 DY6 R6 DY5 R5 DY4 R4 DY3 R3 DY2 R2 0.45 DY1 K R1 Top View 7 10±0.5 Side View 10.16 -HV SIGNAL OUT R1 to R8 : 330 kΩ R9 : 160 kΩ C1 to C3 : 0.01 µF/ 200 V 2.54 For +HV, it will be necessary to use a coupling capacitor between the output and the customer's signal processing circuit. GND TACCA0057EF 2.54 5.08 Bottom View Side View TACCA0060EC DA Type Socket Assembly C5781 The C5781 is a subminiature socket assembly that incorporates a voltage divider circuit and a low-noise amplifier. Compact High Voltage Power Supply Units C4900 Series The C4900 series is an on-board type high voltage power supply unit, with a design that aims at providing both “compactness and high performance”. The newly developed circuit achieves high performance and low power consumption. The C4900 series in addition provides enhanced protective functions yet is offered at lower costs. SPECIFICATION of Built-in Amplifier Parameter Input Voltage for Amplifier Current to Voltage Conversion Factor Maximum Output Voltage (with no load resistor) Value ±15 1 10 DC to 20 Unit V V/µA V kHz Typ. Bandwidth (-3 db) 6 AMPLIFIER P GUIDE MARK DY8 17.0±0.2 R8 DY7 R7 DY6 R6 DY5 25 R5 DY4 R4 DY3 R3 DY2 R2 DY1 K 450 R1 C1 C2 R9 C3 +15 V: AWG22 (RED) SIGNAL GND SIGNAL OUT RG-174/U -15 V: AWG22 (BLUE) POWER SUPPLY GND: AWG22 (BLACK) SPECIFICATION -HV: AWG22 (VIOLET) Parameter Input Voltage Input Current 1 *A 2 C4900 +15 V dc 14 mA 90 mA 0.6 mA C4900-01 +12 V dc 15 mA 95 mA 0.5 mA C4900-50 +15 V dc 14 mA 90 mA 0.6 mA C4900-51 +12 V dc 15 mA 95 mA 0.5 mA R1 to R8 : 330 KΩ R9 : 160 KΩ C1 to C3 : 0.01 µF/200 V +15 V: AWG22 (RED) -15 V: AWG22 (BLUE) SIGNAL OUT: RG-174/U GND: AWG22 (BLACK) -HV: AWG22 (VIOLET) TACCA0061EC Variable Output Range Maximum Output Current Ripple Noise Line Regulation *B Load Regulation *C 0 V to -1250 V 0 V to +1250 V 0.007 % p-p Typ. ±0.01 % p-p Typ. ±0.01 % p-p Typ. 1with no load 2with full load *A: at maximum output voltage *B: against ±1 V Change. *C: against 0 to 100 % Load Change. METAL PACKAGE PHOTOMULTIPLIER TUBE R7400U SERIES WARNING: HIGH VOLTAGE The metal package photomultiplier tubes are operated by applying a high voltage. Use extreme caution to avoid electrical shock and damage to the peripheral equipment and be sure to provide adequate safety measures as needed. As safety measures, an insulation cover is fitted to the metal package which is electrically connected to the photocathode. When operated with the cathode at a high voltage (anode HIGH VOLTAGE ground scheme), the metal package will be at this same high voltage level. Removing the insulation cover is extremely dangerous, so never attempt to remove it from the package. RELATED PRODUCTS PHOTOSENSOR MODULES H6779/H6780/H5784 SERIES The H6779/H6780 series are new light sensor modules including the compact photomultiplier tube, (METAL PACKAGE PMT) and operating power supply. It features low voltage operation (+15 V) and low power consumption (Approx. 450 mW for H6779/H6780). Compared with current light sensors, it has several advantages like high sensitivity, wide dynamic range and fast time response. These are featured by the PMT and the Cockcroft-Walton high voltage power supply. The H5773/H6779 series are on-board types which facilitates mounting directly on a printed circuit board and the H5783/H6780 series have a cable output. H5784 series are cable out type with an amplifier of DC to 20 kHz bandwidth. These versions accept direct light input or an optical fiber with the optional fiber connector of E5776. Left: H6780 Center: H6779 Right: H6779 with E5776 Front: METAL PACKAGE PMT METAL PACKAGE PMT FEATURES Low Power Consumption Low Voltage Drive Easy to Use High Sensitivity Wide Dynamic Range Fast Time Response Please refer the individual detail data sheet of H6779/H6780/H5784 series HIGH VOLTAGE POWER SUPPLY H6779 Series TPMHC0093EB H5773, H6779 Series : SIZE 25(W) × 50(D) × 18(L) mm WEIGHT: 50 g H5783,H6780 Series : SIZE 22(W) × 22(D) × 50(L) mm WEIGHT: 80 g H5784 Series : SIZE 22(W) × 22(D) × 60(L) mm WEIGHT: 100 g PATENT: USA 1 (PAT. No. 5410211) PATENT PENDING: JAPAN 12, USA 8, EUROPE 9 HOMEPAGE URL http://www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TPMH1204E06 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it AUG. 2001 IP (1000)